Search found 92 matches
- Wed Jul 06, 2016 6:27 am
- Forum: Lambretta Tech
- Topic: SCOMADI FORKS SERIES 3 TV
- Replies: 4
- Views: 2598
Re: SCOMADI FORKS SERIES 3 TV
The problem rebuilding the lower end was caused by the spring stops. They where welded in about 7mm lower compared to a good set of original Italian GP 200 forks that I have. Thats probably why I had a real hard time compressing the stiffer MB springs. I gave up in the end as the force required to c...
- Wed Jul 06, 2016 6:07 am
- Forum: Lambretta Tech
- Topic: Frame differences Series 2 / Series 3
- Replies: 0
- Views: 1004
Frame differences Series 2 / Series 3
Does anybody know if a Series 2 frame, with the Loop removed, is the same as a Series 3 frame with the Loop removed? I know the rear support over the rear mudguard is different as are the outriggers for the rear runners, but is the tube basically the same length and shape? Are the outriggers for the...
- Mon Jul 04, 2016 9:22 pm
- Forum: Lambretta Tech
- Topic: Plastic drip tray.
- Replies: 9
- Views: 3189
Re: Plastic drip tray.
Warm it up and push it in from the Top of the frame loop. Its a bit tight but it will bend and spring back into shape after you get it through the hole,
- Mon Jul 04, 2016 4:13 pm
- Forum: Lambretta Tech
- Topic: SCOMADI FORKS SERIES 3 TV
- Replies: 4
- Views: 2598
Re: SCOMADI FORKS SERIES 3 TV
I had problems with Mine. I couldnt get them to fit using a dust cover, (treid 4 different covers) ,and I had to file the groove for the headset bolt in the right place. Also gave up trying to fit harder springs as there was no way they were going to go in without using excessive force. One of the b...
- Wed Jun 22, 2016 4:51 pm
- Forum: General Scooter Chat
- Topic: Metal compound
- Replies: 8
- Views: 3739
Re: Metal compound
Is it Petrol Prof as well?
- Mon Apr 18, 2016 6:55 am
- Forum: Lambretta Tech
- Topic: Scootrs hydraulische conversion for original disc brakes
- Replies: 8
- Views: 2780
Re: Scootrs hydraulische conversion for original disc brakes
I have the Circlip type one. The original Disc Brake will do a full stop as long as Im pushing the Scooter on level ground, If I roll it downhill while sitting on the Scoot, It doesnt slow me down very much at all. When I rode the Scooter at about 20 Mph and pulled the front brake, nothing noticable...
- Sun Apr 17, 2016 11:15 am
- Forum: Lambretta Tech
- Topic: Scootrs hydraulische conversion for original disc brakes
- Replies: 8
- Views: 2780
Scootrs hydraulische conversion for original disc brakes
I need to do something about my front brakes. Im using an original front disc brake on reverse pull that I dont want to change. Ive got a new hydraulic conversion cylinder from Scootrs lying around, Would be gratefull if anyone could give some Feedback as to wether its worth fitting or not. Thanks, ...
- Thu Nov 26, 2015 3:39 pm
- Forum: Lambretta Tech
- Topic: ScootRS remade disc brake problem
- Replies: 9
- Views: 3604
Re: ScootRS remade disc brake problem
Still havent got around to checking it out. The brakes brand new, I took it apart to get it powder coated. Not sure if it was making a noise before as I didnt check. I changed the bearings when I put it back together. The original bearings werent marked so I put some new skf ones in. Ill let you kno...
- Thu Nov 19, 2015 7:03 pm
- Forum: Lambretta Tech
- Topic: ScootRS remade disc brake problem
- Replies: 9
- Views: 3604
Re: ScootRS remade disc brake problem
Thanks. Ill have a look at it tomorrow.
- Thu Nov 19, 2015 3:29 pm
- Forum: Lambretta Tech
- Topic: ScootRS remade disc brake problem
- Replies: 9
- Views: 3604
Re: ScootRS remade disc brake problem
I could have put the axle in the wrong way as I took it apart to get powder coated. Ill need to check that out, which way does it go in again? Shoulder side on the right or left??