Lambretta plug,
NGK B8es,
Champion N4c (copper core).
if running with a SIP speedo then a resistor type is adviced.
Search found 149 matches
- Mon Feb 08, 2016 7:21 pm
- Forum: Lambretta Tech
- Topic: LAMBRETTA PLUG GRADE????
- Replies: 25
- Views: 10681
- Tue Jan 19, 2016 7:34 pm
- Forum: General Scooter Chat
- Topic: sip stud.nuts coming undone
- Replies: 26
- Views: 7685
Re: sip stud.nuts coming undone
I lost 2 off the rear wheel (at the same time) with 'Nordlock' washers, I replaced with 2 I had on my spare, Not sure if I had tightened up enough but when I put the spare 2 on I give a bit more with the 'elbow grease' and heard the lock washers give a loud click. I went round and did the same to th...
- Tue Jan 05, 2016 11:06 pm
- Forum: Lambretta Tech
- Topic: exotic cylinder conversion mystery ?
- Replies: 47
- Views: 19378
Re: exotic cylinder conversion mystery ?
No, not the gas-gas, the guy who run the dyno had a modern street bike/racer under a cover. I think it was an Aprillia based bike but the engine had a Rotax 250 top-end grafted on it. The owner said he had 45hp out of it. Eden will fill in the gaps. The gas-gas in the Lammy frame is/was a trials eng...
- Tue Jan 05, 2016 8:57 pm
- Forum: Lambretta Tech
- Topic: exotic cylinder conversion mystery ?
- Replies: 47
- Views: 19378
Re: exotic cylinder conversion mystery ?
Eden, the lad who did the dyno had a modern race bike with a Rotax 250 cylinder on a (I think) Aprillia engine, did he say he got 45hp out of his. think it was an ex cart top-end (watercooled). I had a look at it but didn't ask him.
- Thu Dec 31, 2015 12:09 pm
- Forum: Lambretta Tech
- Topic: BGM silent blocks too big?
- Replies: 12
- Views: 7506
Re: BGM silent blocks too big?
That is the correct way they should be, to prevent the engine case from touching the frame. Eliminate vibration (=silent block).
noticed you have a 'F' stamped above the mount, often wondered what this meant, other casings have a letter stamped above the casing lower damper mount.
noticed you have a 'F' stamped above the mount, often wondered what this meant, other casings have a letter stamped above the casing lower damper mount.
- Fri Nov 27, 2015 3:27 pm
- Forum: Lambretta Tech
- Topic: rd400 rod with suzuki ts 250 piston
- Replies: 18
- Views: 8229
Re: rd400 rod with suzuki ts 250 piston
Just found it (me being a lazy arse)
cheers the-brickie
http://www.tkrj.co.jp/goods/m-AS0810X--30510.php
18X55 gudgeon pin.
cheers the-brickie
http://www.tkrj.co.jp/goods/m-AS0810X--30510.php
18X55 gudgeon pin.
- Fri Nov 27, 2015 3:17 pm
- Forum: Lambretta Tech
- Topic: rd400 rod with suzuki ts 250 piston
- Replies: 18
- Views: 8229
Re: rd400 rod with suzuki ts 250 piston
Bringing this conversion back up to date, I have a complete kit which I'm about to build to a casing. Crank = 58/110 (Ape rod) with 18mm eye, TS250 70mm piston and barrel bored to225. The piston came with a 16mm pin to fit a standard rod with brass top-hats/sleeve (18mm) which are fitted from the ou...
- Thu Sep 10, 2015 11:57 pm
- Forum: General Scooter Chat
- Topic: No engine number.
- Replies: 16
- Views: 6040
Re: No engine number.
Sorry to hear about your friend, shame he never got to see it finished.
I too have No engine number, V5 says 'Not stated' (bought scoot like that).
Deffo try an have a chat with Rob.
Best 38p a week I ever spent.
I too have No engine number, V5 says 'Not stated' (bought scoot like that).
Deffo try an have a chat with Rob.
Best 38p a week I ever spent.
- Sat Jun 20, 2015 11:16 am
- Forum: Lambretta Tech
- Topic: Pinking
- Replies: 8
- Views: 4075
Re: Pinking
Have you strobed the timing ?
I dont know what the low/high revs timing should be but just wondered if it has been checked.
I dont know what the low/high revs timing should be but just wondered if it has been checked.
- Fri May 08, 2015 5:14 pm
- Forum: General Scooter Chat
- Topic: Corrado. - Just Lambretta
- Replies: 23
- Views: 10078
Re: Corrado. - Just Lambretta
and finds time to practice what he preaches, many thanks from Manny too.