you either need a NU2205E bearing or one of these and the bearing you have
https://www.beedspeed.com/lambretta-mag ... mt1tp5jj90
Search found 117 matches
- Wed Mar 08, 2017 6:33 pm
- Forum: Lambretta Tech
- Topic: help crankshafts
- Replies: 18
- Views: 6020
- Wed Mar 08, 2017 6:26 pm
- Forum: Lambretta Tech
- Topic: Carb issues
- Replies: 32
- Views: 11792
Re: Carb issues
would help if we knew what jetting/needle you're running
- Sun Feb 12, 2017 11:07 pm
- Forum: Lambretta Tech
- Topic: Compression on TS1?
- Replies: 29
- Views: 7428
Re: Compression on TS1?
just order normal TS1 piston rings and gap accordingly
- Sat Feb 04, 2017 9:32 pm
- Forum: Paint & Bodywork Tech
- Topic: Two colour panel
- Replies: 4
- Views: 3555
Re: Two colour panel
use fine line masking tape, paint both your base colours then lacquer, you will still have a "ridge" so personally I "flow coat" it by dry flatting the whole panel back with 800 grit (when lacquer cured) then another 2 coats of lacquer that will get rid of the ridge and also prot...
- Sat Jan 28, 2017 1:00 pm
- Forum: Lambretta Tech
- Topic: Agusto 6000 problem?
- Replies: 3
- Views: 1896
Re: Agusto 6000 problem?
it worked fine with the earth sorted out, mine was on n AC system, but I have fit them to bikes with DC and not had a problem
- Fri Jan 27, 2017 5:49 pm
- Forum: Lambretta Tech
- Topic: Agusto 6000 problem?
- Replies: 3
- Views: 1896
Re: Agusto 6000 problem?
I had a similar problem and it turned out to be a bad earth on my Augusto unit
- Sat Jan 14, 2017 6:57 pm
- Forum: Paint & Bodywork Tech
- Topic: Hubs matt laquer or gloss finish
- Replies: 18
- Views: 5372
Re: Hubs matt laquer or gloss finish
thanx, just in the process of painting my mates gp before I do my other one....hope to have it done before the season starts
- Sat Jan 14, 2017 6:44 pm
- Forum: Paint & Bodywork Tech
- Topic: Hubs matt laquer or gloss finish
- Replies: 18
- Views: 5372
Re: Hubs matt laquer or gloss finish
This is one of mine, its all done in direct gloss 2k except the silver which is done in clear over base with gloss anti scratch lacquer
viewtopic.php?f=10&t=36783
viewtopic.php?f=10&t=36783
- Fri Jan 13, 2017 7:02 am
- Forum: Paint & Bodywork Tech
- Topic: Hubs matt laquer or gloss finish
- Replies: 18
- Views: 5372
Re: Hubs matt laquer or gloss finish
ALL 2k metallic's and pearls are "clear over base" or "2 stage" they dry totally matt and need to be clear coated, you can have matt, satin or gloss finish. most 2k solid colours are "direct gloss" although you can get 2 stage solid colours
hope that helps
hope that helps
- Sun Jan 01, 2017 5:47 pm
- Forum: Paint & Bodywork Tech
- Topic: painting over 2 pack
- Replies: 2
- Views: 2216
Re: painting over 2 pack
As coaster said, etch primer is designed for bare metal, I wouldn't use an acid etch primer over any paint, personally I wouldn't use primer out of rattle cans (except to dust over if I cut through any primer) you should be ok with a 2k high build primer though or you could just use a "1K"...