Scooterotica

Mrnice71

Rolf are the best , l couldn't get a cheap one to fit either and use lots of seal grease

Mrnice71

I emailed him today & got a reply

Mrnice71

The new Ron moss looks good

Mrnice71

Is the disc fully floating? Has the disc got a circlip in it ? If so remove circlip and make sure disc is free on pins . Are the pads tight in the housings ? Also the cable needs to be as short as possible in fact nearly to short for it to work correctly reverse pull . Converting to hydraulic will i...

Mrnice71

Cant you use an old cable as a guide or something similar ? And make sure you get a hose with the banjos already fitted , them ones you assemble yourself are nothing but trouble .

Mrnice71

hendy wrote: ↑Sat Jan 19, 2019 7:04 am
Mrnice71 wrote: ↑Sat Jan 19, 2019 1:02 am Thanks some good advice , does 0.5 mm difference alter the compression ratio at all
Short answer is yes. But notnecessarily worse, just lower.

Typical compressed volume is around 20cc and 0.5 on a 70mm bore adds around 2cc, so about 10% lower.

Cheers Hendy

Mrnice71

Thanks some good advice , does 0.5 mm difference alter the compression ratio at all

Mrnice71

Hi fellas trying to set my squish on my TS1 if using a 2mm cylinder packer the squish is 0.93mm a bit close if l use a 2.5mm packer it will be 1.43 mm a bit excessive , wanted it at 1.2mm , any way around this ? Noboby sells a packer in-between these sizes .

Mrnice71

Nothing wrong with a GP200 box good close ratios , what top end you fitting ?

Mrnice71

Good choice , and your still using an 82 link chain

Search found 111 matches

Re: Rear hub oil seal

Re: Calling Corrado!

Re: BGM or ??

Re: cable operated front disc poor performance

Re: Semi-hydraulic MC brake hose length?

Re: Squish & cylinder packplates

Re: Squish & cylinder packplates

Squish & cylinder packplates

Re: What Gearbox to go for !

Re: RT 225 gearing

Login • Register

Advertising