Search found 576 matches
- Thu Jul 23, 2015 10:47 pm
- Forum: Lambretta Tech
- Topic: Advice please
- Replies: 4
- Views: 1931
Re: Advice please
Before I touched it it would do 63 mph (gps) at 7100 rpm (sip speedo). I've changed the front sprocket to a 16 tooth. This change has added about 7-8 mph on the top end. You should be congratulated with that result, and you can go on to become a scooter tuning guru overnight with that level of intu...
- Thu Jul 23, 2015 10:33 pm
- Forum: Lambretta Tech
- Topic: Scooterotica crankshaft ....... Sean? Dan?
- Replies: 15
- Views: 5568
Re: Scooterotica crankshaft ....... Sean? Dan?
Changing crankcase volume with a range of stuffers: simple genious. Why has it not been done before I ask myself. Looking forward to it and some backup performance data. I'm gonna lose sleep for a few weeks now.........eden wrote:not long now Yanker
- Thu Jul 23, 2015 10:15 pm
- Forum: Vespa Tech
- Topic: SIP Road on a standard T5
- Replies: 7
- Views: 2640
Re: SIP Road on a standard T5
I think a 112 will be sufficient + maybe richen the air screw a notch.
- Tue Jul 21, 2015 11:00 pm
- Forum: General Scooter Chat
- Topic: I do love my ratter
- Replies: 21
- Views: 4941
Re: I do love my ratter
What? Even if there is a "tw@7" amongst em?Donnie wrote:But I dont give a f@@k about everyone else
Like your ratter better than mine btw!
- Sun Jul 19, 2015 4:41 pm
- Forum: Lambretta Tech
- Topic: Scooterotica crankshaft ....... Sean? Dan?
- Replies: 15
- Views: 5568
Re: Scooterotica crankshaft ....... Sean? Dan?
And maybe even a longer HT lead? But surely You would not have to do that grinding buisiness? R Taylor/GT crank, hold the 'Paxo' please?eden wrote:easier than grinding crank webs imo, Yanker you forgot to mention rear foot boards
- Sat Jul 18, 2015 4:42 pm
- Forum: Vespa Tech
- Topic: Recommend a good Side Stand for Vespa Rally?
- Replies: 6
- Views: 2223
Re: Recommend a good Side Stand for Vespa Rally?
One for a Vespa PK! You will still have to adjust the mounting bolt holes
- Fri Jul 17, 2015 10:31 pm
- Forum: Lambretta Tech
- Topic: Scooterotica crankshaft ....... Sean? Dan?
- Replies: 15
- Views: 5568
Re: Scooterotica crankshaft ....... Sean? Dan?
The better and easier way now to lower primary comp is to use longer rods and a packing plate together with std comp height pistons ,this creates more volumne where its needed. we follow this route now on most engine builds we do if we can,but if your going to retain the 107/110 rod then these cran...
- Fri Jul 03, 2015 11:12 pm
- Forum: Lambretta Tech
- Topic: self closing throttle
- Replies: 40
- Views: 16536
Re: self closing throttle
Cheaper than a Pound Shop genuine cock ring that is you Pikey!Knowledge wrote:I used an elastic band to close the throttle on my old race bike.
- Thu Jun 18, 2015 12:58 am
- Forum: Lambretta Tech
- Topic: 60mm crank and 1mm packer
- Replies: 13
- Views: 4172
Re: 60mm crank and 1mm packer
right i have measured the ports and get these measurement and run on the port timing calculator exhaust = 40.6mm 150.7 deg trans = 46mm 126 deg inlet = 93.5mm 149.65 deg these are with a 60mm crank no base packer,piston protrudes 1mm to give a deck height of -1mm intend to run with taffspeed copy e...
- Thu Jun 18, 2015 12:52 am
- Forum: General Scooter Chat
- Topic: scooterotica dealer specials
- Replies: 6
- Views: 2898
Re: scooterotica dealer specials
A really well done, tricked-up smallie - with a quattrini or falc motor.... I was thinking somthing like that for my V100 Sport, as it does not really live up to the name :( Would Scootererotica also reccomend the Quattrini or Falc over say The Parmakit SP or the Polini EVO for example? (BSG budget...