Search found 297 matches

by Adspeed
Tue Feb 15, 2011 7:25 pm
Forum: Lambretta Tech
Topic: I've gotta fat
Replies: 11
Views: 4395

Re: I've gotta fat

Which one have you got the ADS1 or the ADS3? Two totally differant animals there......if I remember you were going for the 3 on a Muggello?? If its a Muggy did they send you the Muggy Stub?

Adam
by Adspeed
Mon Feb 14, 2011 7:36 pm
Forum: Lambretta Tech
Topic: Chiselspeed Mtech
Replies: 2
Views: 2154

Re: Chiselspeed Mtech

Chiselspeed Website is old and inactive. the guy who did it just dissapeared and I've told Martin to get rid of it loads but its still there....... :? New one soon here I've been told. Anyway look here... http://scooterotica.org/forum/viewtopic.php?f=12&t=3626 Mtech has all the Augustos in the b...
by Adspeed
Mon Feb 07, 2011 10:48 am
Forum: Lambretta Tech
Topic: Gearing/ exhaust advice needed
Replies: 8
Views: 4083

Re: Gearing/ exhaust advice needed

giankx wrote:I've done some miles with my ADS3 and Muggy 200 and the pipe has a great spread of power, pulls from very low down like a box exhaust and revs to 7000. Actually i run sx200 gearbox with 15x46 but i think i need a 16 sprocket.
Very happy with it!
Glad to hear it!! :D
by Adspeed
Sun Feb 06, 2011 2:06 pm
Forum: Lambretta Tech
Topic: Gearing/ exhaust advice needed
Replies: 8
Views: 4083

Re: Gearing/ exhaust advice needed

I would go for the ADS3, the NK pipes aren't known for being that great. As for gearing ,that depends on alot of things like big fella/2 up/rallying with loads of kit/what scooter its going in. 17/46 might be a good place to start on the LI 150 box. As far as i know NK and ADS are actaully manufact...
by Adspeed
Fri Feb 04, 2011 9:26 pm
Forum: Lambretta Tech
Topic: new 5/6 plate clutch for lambrettas
Replies: 194
Views: 80731

Re: new 5/6 plate clutch for lambrettas

Clutches are something I've never really looked into to be honest. I fitted my present one and its been spot on. As you say I use ally plates with a decent compound. Combined with a proper oil and no issues. Increase in tabs can only be a good thing but one thing that stares me in the face here is t...
by Adspeed
Thu Feb 03, 2011 10:28 pm
Forum: Lambretta Tech
Topic: new 5/6 plate clutch for lambrettas
Replies: 194
Views: 80731

Re: new 5/6 plate clutch for lambrettas

Looks real nice that!!

Can you post a picture of a plate against a typical lambretta plate to compare the actual surface areas....?

Cheers Adam.
by Adspeed
Mon Jan 31, 2011 9:19 pm
Forum: Lambretta Tech
Topic: Adspeed exhausts are shocking......
Replies: 47
Views: 20062

Re: Adspeed exhausts are shocking......

RICSPEED wrote:when can i have one to test :anbrgin; :anbrgin; :anbrgin; :anbrgin;
Wish I had one for ya Mr RicSpeed, if a scuffed/used one comes up to be played with your top o my list :D
by Adspeed
Mon Jan 31, 2011 9:16 pm
Forum: Lambretta Tech
Topic: Adspeed exhausts are shocking......
Replies: 47
Views: 20062

Re: Adspeed exhausts are shocking......

I've just built a standard TS1 with transfer timing reduced by 110 Kawasaki rod, and 2mm packer. It's an LI150 box 46/17 giving 4.6 final drive ratio. The engine's not run yet. The engine was built with an old Taffy Road pipe in mind (which is where the 4.6 ratio came from). I'm not now going to be...
by Adspeed
Thu Jan 27, 2011 11:38 pm
Forum: Lambretta Tech
Topic: ChiselSpeed Tuned RB240 Sprinter (Dyno)
Replies: 2
Views: 2254

ChiselSpeed Tuned RB240 Sprinter (Dyno)

Put in Lammy tech Willwanders new motor...... My Winter Project. Just done the first dyno run, so thought it was time for a sneak peek. Still a bit to do, but thought I better get a picture before I get my grinder out.' http://farm6.static.flickr.com/5051/5392836022_8fec7879f1_b_d.jpg Now the intere...