Morning Two questions
1/ Can you leave them bare metal without painting.
2/ I hear on the grapevine there are internal overheating issues reported and is anyone aware of the modifications people are making to (so i'm told) increase the tailpipe sizing, maybe new tailpipe
Thanks
Search found 360 matches
- Mon Apr 17, 2017 9:05 am
- Forum: Lambretta Tech
- Topic: BGM Clubman - version 3
- Replies: 6
- Views: 2616
- Sun Apr 16, 2017 8:54 am
- Forum: Lambretta Tech
- Topic: Avanti bogging down
- Replies: 23
- Views: 7289
Re: Avanti bogging down
Only a thought.......as i have run an Avanti for 6 years regularly now with not one issue from the kit, BUT i did have a succession of 'off the line' bogging down problems away from the lights which turned out on all 'Three Occasions' (can't believe my luck) to be petrol burning it's way through the...
- Sun Apr 16, 2017 8:50 am
- Forum: Lambretta Tech
- Topic: How tight should chain be?
- Replies: 24
- Views: 12230
Re: How tight should chain be?
Hi Warts, is it advantageous to still include a lower guide ? I was thinking of the lower 'Green' slipper rather than the original innocenti one to potentially stop any slap against the base of the engine casing. One thing that strikes me is the X4 has an aluminium block into the case below where th...
- Sun Apr 16, 2017 8:05 am
- Forum: Lambretta Tech
- Topic: How tight should chain be?
- Replies: 24
- Views: 12230
Re: How tight should chain be?
Tightness is only an issue where there is no tensioner. So although correct the 2-3% rule is for motorcycles. The one in the picture will work fine, in fact it is good. There is a catena effect on chain chain and the standard Lambretta tensioners work against it, the one shown works with it. Andy A...
- Fri Apr 14, 2017 7:15 am
- Forum: Lambretta Tech
- Topic: oiltech casing alterations
- Replies: 86
- Views: 29027
Re: oiltech casing alterations
Hi the case was£350 including endplate from lambretta restore its a ts230 with a gt60/110 crank li150 gearbox 46/16 /4.9 porting to barrel head and barrel pinned as I used a 2.5 head packer and 2mm base packer and an ads5 road/ race exhaust with a 30 mm vhsh carb iam going to put it in my Spanish l...
- Sat Apr 08, 2017 7:15 am
- Forum: Lambretta Tech
- Topic: Tyre Pressures
- Replies: 20
- Views: 12565
Tyre Pressures
Hi does anyone know the up to date, current thinking on tyre pressures for a Lambretta ? FOR
1/ Tubed Lambretta tyres
2/ Tubeless rim type wheels
1/ Tubed Lambretta tyres
2/ Tubeless rim type wheels
- Sun Mar 19, 2017 5:03 pm
- Forum: Lambretta Tech
- Topic: Leak Down Test
- Replies: 9
- Views: 4938
Re: Leak Down Test
Garry.....yes came in, shower and dinner and a bit of TV whilst i ponder next moves. Will give it another go in the week, there's no rush. Yes i have an Li.box and do like the GP indian 200 one, got that one in my Avanti and nice ride.
- Sun Mar 19, 2017 4:01 pm
- Forum: Lambretta Tech
- Topic: Leak Down Test
- Replies: 9
- Views: 4938
Re: Leak Down Test
Cheers...........i gave up today, it can be deflating (excuse the pun). i will strip out the stator next and test the mag flange better. Head's difficult to test, but sprayed where i could and no hissing, mind you, no hissing anywhere tbh....I used the red sealant (600 fahrenheit) stuff the mag flan...
- Sun Mar 19, 2017 1:08 pm
- Forum: Lambretta Tech
- Topic: Anyone Dyno'ed SH2/22 with BGM High-Flow?
- Replies: 13
- Views: 6176
Re: Anyone Dyno'ed SH2/22 with BGM High-Flow?
Adam, This is not completely relevant i know, but i had a Dave Webster stage 4 steel barrel where i upjetted the standard Delly 22 to a 128 and then 130 main jet, completely removing the air filter and it really flew along as opposed to when i left the paper filter in the bow. I was going to try the...
- Sun Mar 19, 2017 1:00 pm
- Forum: Lambretta Tech
- Topic: Leak Down Test
- Replies: 9
- Views: 4938
Re: Leak Down Test
Cheers both..........Garry thanks for confirming the 5 PSI......incidentally it drops off within a minute and bottoms out to 40 mmhg. Just changed the silent blocks on the engine case (another story, the engine bolt not greased and split rubbers on other silent blocks getting it out). I will now whi...