Search found 82 matches
- Fri Jul 16, 2010 9:37 am
- Forum: Lambretta Tech
- Topic: SIP Tubeless wheel rims
- Replies: 23
- Views: 5961
Re: SIP Tubeless wheel rims
I had to cut the tyres off my Scoot RS tubeless rims when I needed to replace them, the tyres were bald anyway so it wasn't a problem but it's worth making sure your tyre fitter knows which direction to put the tyre on the rim when he fits them because if he gets it wrong you aint going to be able t...
- Fri Jul 09, 2010 1:26 pm
- Forum: Lambretta Tech
- Topic: Damper advice
- Replies: 2
- Views: 1458
Re: Damper advice
Should be just about perfect for using the Kawasaki steering damper type dampers then
Normally have to use a spacer which is roughly about an inch and a half long with this type of damper to mount them in lambretta fork brackets so your damper mounts should be just about spot on.
Normally have to use a spacer which is roughly about an inch and a half long with this type of damper to mount them in lambretta fork brackets so your damper mounts should be just about spot on.
- Sun Jun 13, 2010 8:49 am
- Forum: Show us yer Scoots!!
- Topic: london to Santander
- Replies: 14
- Views: 5139
Re: london to Santander
Hi Simon, what's happenend to the RB? Glad to hear the trip to Spain went without incident, you must be really pleased with the S1? My Series 1 fired up for the 1st time yesterday since she blew up on the way to Woolacombe last year. Just got to get an MOT on it and jet it in and we'll be set for Fr...
- Fri Jun 11, 2010 1:28 pm
- Forum: Show us yer Scoots!!
- Topic: london to Santander
- Replies: 14
- Views: 5139
Re: london to Santander
Nice Picture Grubby, Are you coming to Beetsugar this year with Simon and TJ and I?
- Wed Feb 03, 2010 4:49 pm
- Forum: Lambretta Tech
- Topic: shell oils
- Replies: 4
- Views: 1479
Re: shell oils
My Mrs. is Global Marketing Manager for Shell Lubricants.
I only use Rock Oil pre-mix in my TS1!
I only use Rock Oil pre-mix in my TS1!
- Mon Oct 26, 2009 5:56 pm
- Forum: Lambretta Tech
- Topic: Endcan Changing Query
- Replies: 5
- Views: 1591
Re: Endcan Changing Query
Hi Mike,
None probably, I changed the Devtour endcan on my GP for a PM Carbon one with no ill effects. I doubt you would notice any performace gains either though.
Cheers, Matt
None probably, I changed the Devtour endcan on my GP for a PM Carbon one with no ill effects. I doubt you would notice any performace gains either though.
Cheers, Matt
- Fri Sep 11, 2009 9:43 am
- Forum: Lambretta Tech
- Topic: TS1 Frame Clearance
- Replies: 11
- Views: 4048
Re: TS1 Frame Clearance
i wouldnt lose the reed stops they are there for a reason, no stops or even bent to open too much will end in you fukin them and you stuck at the side of the road with the reeds mullered I wouldn't necessarily lose the reed stops on standard reeds but I and a lot of other's I know have done many 00...
- Thu Sep 10, 2009 12:24 pm
- Forum: Lambretta Tech
- Topic: TS1 Frame Clearance
- Replies: 11
- Views: 4048
Re: TS1 Frame Clearance
not if you lose the reed stops!
- Thu Sep 10, 2009 11:46 am
- Forum: Lambretta Tech
- Topic: TS1 Frame Clearance
- Replies: 11
- Views: 4048
Re: TS1 Frame Clearance
Oh, and I forgot, use two gaskets between the reed block and the cylinder.
Matt
Matt
- Thu Sep 10, 2009 11:42 am
- Forum: Lambretta Tech
- Topic: TS1 Frame Clearance
- Replies: 11
- Views: 4048
Re: TS1 Frame Clearance
Use 2 stage boysens, bin the reed stops and loose the 5mm packer. Simples!