Search found 1447 matches
- Sat Apr 11, 2020 8:19 pm
- Forum: Lambretta Tech
- Topic: Leak down test.
- Replies: 7
- Views: 2786
Leak down test.
Hi all, I’ve been tracking down a leak on an engine I built in 2016. I traced it to the M6 threads that hold the stator plate in the mag housing. I used a brand new new SIL housing along with a brand new SIL engine case. The bolts were very loose in the threads so I re tapped them and put new insert...
- Fri Apr 10, 2020 6:29 pm
- Forum: Lambretta Tech
- Topic: GT 186 with or without standard filter.
- Replies: 3
- Views: 4560
GT 186 with or without standard filter.
Hi all, Like most of the population I’m self isolating and off work. I’m being kept occupied by finishing off a project I started way back in 2016. The original plan was a GT186 running with a 25 mm dellorto through the original box with a BGM uprated filter. Anyway since then I’ve realised the stan...
- Mon Dec 30, 2019 10:32 am
- Forum: Lambretta Tech
- Topic: Cheap 5/6 plate clutch
- Replies: 11
- Views: 4145
Re: Cheap 5/6 plate clutch
Readspeed 100%. Handles the 21bhp my Imola made no problem.
- Sun Apr 28, 2019 6:48 pm
- Forum: Lambretta Tech
- Topic: Which crank?
- Replies: 1
- Views: 1492
Which crank?
Hi all, I’m building a non standard motor probably be a GT186 kit. Which crank will be up to the job? I’m not throwing loads of money at it but want a good reliable crank. Any recommendations would be gratefully received. Thanks Pete.
- Fri Aug 31, 2018 9:36 pm
- Forum: Lambretta Tech
- Topic: Easy clutch
- Replies: 9
- Views: 5176
Re: Easy clutch
Yes, I’m using them on 2 of my scoots. Well worth the money and effort of fitting them.
- Sun Oct 08, 2017 8:00 am
- Forum: Lambretta Tech
- Topic: Pull down chain tensioner
- Replies: 8
- Views: 4382
Re: Pull down chain tensioner
Casa one for me.
Re: Saying Hi
I was referring to specialist tools like rear hub puller / holder , flywheel puller / holding tool, clutch compressor, clutch holding tool, crank puller / holder / removing tools, fork spring compressor, steering clamp spanners etc etc. If you don’t have access to any I’ll lend you mine mate.
- Fri Oct 06, 2017 9:01 pm
- Forum: Lambretta Tech
- Topic: Heavy LTH clutch.
- Replies: 6
- Views: 4062
Re: Heavy LTH clutch.
They both work perfectly but I’ve found the LTH to be a bit on the heavy side. As for the Readdpeed what a great clutch for the money.
Re: Saying Hi
Welcome Matt, I’m just down the road in Farnborough, if you ever need any advice or need to borrow tools give me a shout. Aldershot has quite a healthy scooter scene too, so plenty of like minded people about.