Search found 169 matches
- Thu Sep 05, 2019 10:56 am
- Forum: Lambretta Tech
- Topic: Lambretta wiring problem need Advice
- Replies: 5
- Views: 1863
Re: Lambretta wiring problem need Advice
thanks so where do i add the purple from the main loom
- Thu Sep 05, 2019 9:36 am
- Forum: Lambretta Tech
- Topic: Lambretta wiring problem need Advice
- Replies: 5
- Views: 1863
Lambretta wiring problem need Advice
So trying to wire up my sx- the loom is a new 12v one – it seems to have a black a purple a brown and green So a SX switch and key ignition in headset The brown and green black are easy enough—just match them up – but where does the purple go- I read in a manual Purple from the main loom, to purple ...
- Sat Jul 13, 2019 9:00 pm
- Forum: Lambretta Tech
- Topic: New clutch spider problem
- Replies: 2
- Views: 1415
Re: New clutch spider problem
Cheers sorted spider was slightly taller so got it altered and it's fine now
- Tue Jul 02, 2019 11:25 pm
- Forum: Lambretta Tech
- Topic: New clutch spider problem
- Replies: 2
- Views: 1415
New clutch spider problem
Just fitted a new spider as it was knacked was meant to be the same spider but can't get clutch to engage now, so they must be some slight diffrance in height or something same plates and clutch. Tried slightly thinner top and bottom plate doesn't engage at all. Adjusted cable as much as I can doens...
- Thu Jun 13, 2019 7:14 am
- Forum: Lambretta Tech
- Topic: 81 or 82 chain on down tensioner 16 x 46
- Replies: 2
- Views: 1834
81 or 82 chain on down tensioner 16 x 46
So I want to go 16 x 46 with a pulldown tensioner do I use a 81 link chain or 82, or does it matter. I've had a few 81s fall to bits on the half link with 17 x 46 so I think 82 may be better but will it be to slack.
- Wed May 08, 2019 8:26 pm
- Forum: Lambretta Tech
- Topic: CASA SS 200
- Replies: 4
- Views: 1731
Re: CASA SS 200
Think I well go gt 186
- Wed May 08, 2019 7:42 pm
- Forum: Lambretta Tech
- Topic: CASA SS 200
- Replies: 4
- Views: 1731
Re: CASA SS 200
Cheers I've got a gt 200 and that's a nice ride with a ad5 was going to build a small block with a gt 186 but wanted something a bit diffrent
- Wed May 08, 2019 1:45 pm
- Forum: Lambretta Tech
- Topic: CASA SS 200
- Replies: 4
- Views: 1731
CASA SS 200
Hi has anyone been running a Casa SS 200 with some miles on- was considering the kit till I heard plating problems of a few of the kits ?
- Tue Nov 13, 2018 12:27 pm
- Forum: Lambretta Tech
- Topic: Rapido Barrel 225 Reed conversion piston
- Replies: 1
- Views: 1747
Rapido Barrel 225 Reed conversion piston
Hi All, I have a Rapido Barrel 225 which has been converted into reed valve induction – and had a bit of tuning done and it’s been re-bored to 70.5 mm, I can see I can get a piston and cut holes in it to suit I guess . But was wondering if there’s a TS1 piston which you can buy at these size- can on...
- Sun Jul 08, 2018 7:52 pm
- Forum: Lambretta Tech
- Topic: Flooding/bogging at low Speed
- Replies: 11
- Views: 4997