Another question, what would be a good pilot jet to start with.
Thanks
Search found 96 matches
- Tue Feb 21, 2012 7:43 pm
- Forum: Vespa Tech
- Topic: 166 jetting advice
- Replies: 6
- Views: 2758
- Tue Feb 21, 2012 8:26 am
- Forum: Vespa Tech
- Topic: 166 jetting advice
- Replies: 6
- Views: 2758
Re: 166 jetting advice
Thanks very much,I'll buy the jets as suggested and work from there
- Mon Feb 20, 2012 7:51 pm
- Forum: Vespa Tech
- Topic: 166 jetting advice
- Replies: 6
- Views: 2758
Re: 166 jetting advice
Does the choke introduce more air or fuel, and does it weaken or richen the mixture
Please could someone let me know
Thanks
Please could someone let me know
Thanks
- Sun Feb 19, 2012 8:59 pm
- Forum: Vespa Tech
- Topic: 166 jetting advice
- Replies: 6
- Views: 2758
166 jetting advice
I have just built a Malossi 166 engine, it has a new 24si carb which is a copy of the Dellorto The jets in it are not numbered do don't really know any settings At the moment it's really boggy, setting off and running, but if I run it with the choke out its almost there, what does that mean, too ric...
- Sat Jan 21, 2012 3:55 pm
- Forum: Vespa Tech
- Topic: Gearing question
- Replies: 2
- Views: 1102
Re: Gearing question
I don't know anything about the engine or in fact if it is a Malossi up gear kit, I just counted the teeth on the gears, what would you advise are my options to make it more rideable
- Fri Jan 20, 2012 9:53 pm
- Forum: Vespa Tech
- Topic: Gearing question
- Replies: 2
- Views: 1102
Gearing question
I have just stripped my engine to fit a malossi kit, I will be porting the casings to match. The engine is new to me and on looking at the gerabox config it appears to have a standard p125 gearbox ( i beleive same as T5 ? ) and has a Malossi upgera kit in it 23 x 64. Would this configuration work wi...
- Thu Dec 29, 2011 9:47 pm
- Forum: Vespa Tech
- Topic: PX 125 barrel upgrade
- Replies: 15
- Views: 5676
Re: PX 125 barrel upgrade
Thanks for that Ill give him a call
- Mon Dec 26, 2011 10:11 pm
- Forum: Vespa Tech
- Topic: PX 125 barrel upgrade
- Replies: 15
- Views: 5676
Re: PX 125 barrel upgrade
Is the 166 kit very revvy and not very torquey, or is it ok with the siminini pipe
Does the upgear kit help. and if so which one is it
thanks
Does the upgear kit help. and if so which one is it
thanks
- Tue Dec 20, 2011 8:39 pm
- Forum: Vespa Tech
- Topic: PX 125 barrel upgrade
- Replies: 15
- Views: 5676
Re: PX 125 barrel upgrade
is the DR the best of the kits, i understand the Parmakit and the pinasaco are alloy barrels and the others cast.
- Tue Dec 20, 2011 7:20 pm
- Forum: Vespa Tech
- Topic: PX 125 barrel upgrade
- Replies: 15
- Views: 5676
Re: PX 125 barrel upgrade
How much is that an increase on standard