I've had mine for 2 years now and spring doesn't rotate, have you wound up the preload to max, you're just a little heavier than me, but
mine is wound up to max
Search found 35 matches
- Thu Jun 19, 2014 2:12 pm
- Forum: Lambretta Tech
- Topic: A good rear shocker choice that's adequate.
- Replies: 25
- Views: 7699
- Thu Jun 05, 2014 12:37 pm
- Forum: Lambretta Tech
- Topic: A good rear shocker choice that's adequate.
- Replies: 25
- Views: 7699
Re: A good rear shocker choice that's adequate.
Hagon, good basic shock with 3 position spring poad and reasonable price
- Tue May 06, 2014 10:29 pm
- Forum: Lambretta Tech
- Topic: Carb Spitback Help??? its getting to me now.
- Replies: 41
- Views: 18039
Re: Carb Spitback Help??? its getting to me now.
Don't know about the carb but seems to me that your port timings may be out as piston shouldn't really be below level of exhaust port
- Sat Mar 22, 2014 9:38 am
- Forum: Lambretta Tech
- Topic: Taffy copy pipe
- Replies: 89
- Views: 19502
Re: Taffy copy pipe
I got one off Corrado as well. The first pipe I haven't had to fettle to fit
- Sun Mar 16, 2014 9:25 am
- Forum: Tech FAQ
- Topic: combustion chamber volume
- Replies: 2
- Views: 1360
Re: combustion chamber volume
to find the required combustion chamber volume use the formula CCV=CV/CR-1, CCV=combustion chamber volume, CV =cylinder volume, CR= compression ratio.
For yoursCCV=225/9.5-1, CCV=225/8.5, CCV= 26.47cc. Hope this helps
For yoursCCV=225/9.5-1, CCV=225/8.5, CCV= 26.47cc. Hope this helps
- Wed Mar 12, 2014 11:57 am
- Forum: Lambretta Tech
- Topic: taffspeed knocking
- Replies: 24
- Views: 7747
Re: taffspeed knocking
Move the end can bracket to the other side of the chaincase bracket and file or machine the bolt head down in thickness, cured it on mine
- Wed Mar 05, 2014 11:16 pm
- Forum: Lambretta Tech
- Topic: Any one fitted an Acewell?
- Replies: 17
- Views: 5555
Re: Any one fitted an Acewell?
Battery, yes I run a full DC on mine so no problem, wired through ignition switch
- Wed Mar 05, 2014 11:14 pm
- Forum: Lambretta Tech
- Topic: Any one fitted an Acewell?
- Replies: 17
- Views: 5555
Re: Any one fitted an Acewell?
Won't fit in a series 3 hole as it's round, straight fit into a series 2. Doesn't foul the wheels in mine. You could use the supplied mounting bracket attached to a blanking plate in the headset
- Wed Mar 05, 2014 9:45 pm
- Forum: Lambretta Tech
- Topic: Removing studs out of engine case
- Replies: 38
- Views: 7464
Re: Removing studs out of engine case
Get some long nuts made up same length as spacer then you can keep the studs in chaincase, attach bracket with bolts on other end, saves using screws in and out of alloy
- Wed Mar 05, 2014 9:43 pm
- Forum: Lambretta Tech
- Topic: Any one fitted an Acewell?
- Replies: 17
- Views: 5555
Re: Any one fitted an Acewell?
Speedo runs from magnetic pick up on front wheel, cable runs down forks a la Lammy speedo. There is a tacho that works from windings around HT lead, It has two trip meters and an odometer, there is a fuel gauge if you've got one. Then there are idiot lights for dipped and main beam and indicators. I...