" Are they doing a cowling to fit as well ? "
yes but they were waiting for them to arrive .
Search found 361 matches
- Sat Oct 08, 2016 10:58 pm
- Forum: Lambretta Tech
- Topic: rb 250 avanti or normal head
- Replies: 19
- Views: 5403
- Fri Oct 07, 2016 9:30 pm
- Forum: Lambretta Tech
- Topic: MBD strengthened ( lightened ) clutch crown wheel
- Replies: 6
- Views: 2471
Re: MBD strengthened ( lightened ) clutch crown wheel
Sorry I should have been more clear - the base of the spider didn't protrude from bottom of the sprocket. It would have locked up if tightened down. ah yes i had this with the tino crown wheel but it was only slightly short , i removed a small amount from the crown wheel centre to stop it locking up.
- Fri Oct 07, 2016 7:50 pm
- Forum: Lambretta Tech
- Topic: MBD strengthened ( lightened ) clutch crown wheel
- Replies: 6
- Views: 2471
Re: MBD strengthened ( lightened ) clutch crown wheel
My road lamby has an af machined deeper sil crown wheel with atomic spider and mrb pressure plate and ive got the reedspeed 6 plate clutch fitted , i dont know how deep the mrb crown wheel is but the atomic spider is made for 5/6 plate clutch kits , in my sprinter engine i have a very deep tino crow...
- Thu Oct 06, 2016 11:33 pm
- Forum: Lambretta Tech
- Topic: MBD strengthened ( lightened ) clutch crown wheel
- Replies: 6
- Views: 2471
Re: MBD strengthened ( lightened ) clutch crown wheel
Atomic spider , buzzsolo stock them £55.
- Mon Oct 03, 2016 5:11 pm
- Forum: Vespa Tech
- Topic: New Vespa t5 engine casings
- Replies: 20
- Views: 11484
- Thu Sep 01, 2016 8:16 pm
- Forum: General Scooter Chat
- Topic: Your First scooter /first car ?
- Replies: 53
- Views: 24697
Re: Your First scooter /first car ?
Just before i left school i was a bit of a rockabilly ,i use to go to the youth club and bop away to the Stray cats etc, then in may 1980 at the annual float parade right at the back was a mod band playing (The Argent? ) with a load of scooters following behind , id never seen this sort of thing bef...
- Wed Aug 24, 2016 10:05 pm
- Forum: Lambretta Tech
- Topic: Lambretta clutch tools
- Replies: 12
- Views: 4865
Re: Lambretta clutch tools
There is only one holding tool this holds both the crown wheel and spider together to allow the centre nut to be undone and tightened , the type buzz sells does the same job as the other types , the other essential tool is the clucth spring compressor.
- Wed Aug 24, 2016 9:50 am
- Forum: Lambretta Tech
- Topic: Remove bearing from magneto housing
- Replies: 17
- Views: 5366
Re: Remove bearing from magneto housing
You cant use an old engine mount or drift tool to remove the bearing only knock it in . Whether the bearing justs drops out with heat all dependings on how the bearing went in and how long its been in there, some people dont heat the housing up hot enough and the bearing gets knocked in , this can s...
- Wed Aug 10, 2016 8:05 pm
- Forum: Lambretta Tech
- Topic: Brake Shoes Small Alloy Bits
- Replies: 6
- Views: 2674
Re: Brake Shoes Small Alloy Bits
Li / sx shoes have the cam/shoe heel steel plate cast into the shoes , gp ones are loose , some indian gp casings have the brake pin holes drilled approx 1mm out of were they should be so by not using the heel plate will allow the hub to go on , you will find the shoes wear down and need replacing w...
- Sat Aug 06, 2016 3:30 pm
- Forum: Lambretta Tech
- Topic: hydraulic front brake not working after a lay up !
- Replies: 2
- Views: 1744
Re: hydraulic front brake not working after a lay up !
I heard about this before with a classic car and it was someone topping up with silicone based fliud which reacts with Dot4 , i believe its a complete strip and all components seals will need replacing. Just done a google search and its saying a reaction of wrong type of fluids added, looks like qui...