Search found 361 matches
- Fri Feb 17, 2017 8:51 pm
- Forum: Standard Scoots & Restorations
- Topic: which lambretta gearbox?
- Replies: 16
- Views: 10189
Re: which lambretta gearbox?
I have an Indian Li150 box and the shim thats supposed to go on the bottom of the cluster wont sit deep enough,the recess on 4th gear hasn't been machined deep enough and when fitted and tightened up the whole gearbox locks up. Af close ratio gearbox dosnt use a shim at the bottom of the cluster, i...
- Fri Feb 10, 2017 9:44 pm
- Forum: Lambretta Tech
- Topic: Timing Casatronic
- Replies: 19
- Views: 6987
Timing Casatronic
because thats too advanced for a standard 200 ?Muppet wrote:why 16 or 17; why not 14 or 15
- Fri Feb 10, 2017 12:41 pm
- Forum: Lambretta Tech
- Topic: Engine Mount Removal Tool - Homemade
- Replies: 29
- Views: 9912
Re: Engine Mount Removal Tool - Homemade
A word of caution, the original tool is designed to prevent the casing lugs from breaking when with-drawing or mounting the mounts using heat , deviate from the design and risk breaking the casing lugs as many others have done in the past , it will then cost you a lot more than £30-£40 .
- Fri Feb 03, 2017 9:36 pm
- Forum: Lambretta Tech
- Topic: Oil seal removal [emoji24]
- Replies: 19
- Views: 5303
Re: Oil seal removal [emoji24]
if you cant budge the 4 screws /bolts with a screwdriver or impact, get a long dot punch and tap the corner of the slot anti clockwise carefully or even a thin bar grind to fine point , this will loosen the screws then they will just come out .
- Sun Jan 29, 2017 6:59 pm
- Forum: General Scooter Chat
- Topic: Recommended gp chain tensioner
- Replies: 21
- Views: 7266
Re: Recommended gp chain tensioner
I agree with Dan on this, these are simple , uncomplicated , i remove the 2 screws and loctite in for safe measure , ive now been using for a few years in my own sprint and tuned motors. Just looked on AF there's two one of price of the other the cheaper of the two says needs drive plate screw, exc...
- Sun Jan 29, 2017 6:02 pm
- Forum: General Scooter Chat
- Topic: Recommended gp chain tensioner
- Replies: 21
- Views: 7266
Re: Recommended gp chain tensioner
https://uploads.tapatalk-cdn.com/20170129/7c3b6abdeef72597204bcace0961579c.jpg I used these from AF in a lot of engines, always thought they were good value. Sent from my iPhone using Tapatalk I agree with Dan on this, these are simple , uncomplicated , i remove the 2 screws and loctite in for safe...
- Fri Jan 20, 2017 10:08 pm
- Forum: Lambretta Tech
- Topic: AF Lightened flywheel
- Replies: 20
- Views: 8352
Re: AF Lightened flywheel
has anybody in the last 40 years actaully done a airflow-test on a Lambretta flywheel cowl (+ head cowl) with different flywheel types (short finned/ long finned / lightened) to show the differences in airflow and what easy optimisations can be achieved? Yes , Ben @AF did some extensive testing a c...
- Fri Jan 20, 2017 4:24 pm
- Forum: Lambretta Tech
- Topic: Rb manifold rubber
- Replies: 4
- Views: 2648
Re: Rb manifold rubber
My Rb with standard manifold was very close to the large engine mounts, ive now got the LTH manifold fitted and it has a lot more around 8mm clearance.
- Fri Jan 20, 2017 1:25 pm
- Forum: Lambretta Tech
- Topic: AF Lightened flywheel
- Replies: 20
- Views: 8352
Re: AF Lightened flywheel
has anybody in the last 40 years actaully done a airflow-test on a Lambretta flywheel cowl (+ head cowl) with different flywheel types (short finned/ long finned / lightened) to show the differences in airflow and what easy optimisations can be achieved? Yes , Ben @AF did some extensive testing a c...
- Wed Dec 14, 2016 7:28 pm
- Forum: General Scooter Chat
- Topic: Uni Lambretta 200 casing
- Replies: 40
- Views: 21330
Re: Uni Lambretta 200 casing
AF have the new uni side casings in stock , fine blasted or non blasted that is still very smooth and very good quality and would polish up very nicely. I was told the casings are being tested but some changes were being considered to cut the production cost down without compomising strength or qual...