Search found 106 matches
- Fri Apr 14, 2017 9:03 pm
- Forum: Lambretta Tech
- Topic: Avanti bogging down
- Replies: 23
- Views: 7092
Avanti bogging down
I've got this problem on an Avanti I rebuilt for my mate. We changed the crank and finally cured (after several attempts) the drive side oil seal failing with a rimini drive side plate. But now, it really bogs down in first and 2nd and you have to really rev and slip the clutch to get away. Reminds ...
- Fri Apr 14, 2017 8:14 pm
- Forum: Lambretta Tech
- Topic: Bogging Down , Won't Pull Away.
- Replies: 25
- Views: 10391
Re: Bogging Down , Won't Pull Away.
I've got exactly this problem on an Avanti I rebuilt for my mate. We changed the crank and finally cured (after several attempts) the drive side oil seal failing with a rimini drive side plate. But now, it really bogs down in first and 2nd and you have to really rev and slip the clutch to get away. ...
- Tue Jan 31, 2017 9:17 pm
- Forum: General Scooter Chat
- Topic: EXOL.............Again???????
- Replies: 29
- Views: 9040
Re: EXOL.............Again???????
Why don't we call it a day and leave it that some folk think exol oil is the dogs whats its and others think it crap. Agreed ! I think it's good oil for the price and I run 4 lambretta on it , as of yet, no mechanical failures on the top end - ran this for about 5 years , had about 7 tubs - mind yo...
- Tue Jan 17, 2017 7:34 am
- Forum: Lambretta Tech
- Topic: GORI 50mm EXHAUST
- Replies: 19
- Views: 6816
Re: GORI 50mm EXHAUST
I've got the "rimini only" GP50 - it's not the tightest fit on the slip joint, unlike the Ron moss/BGM , but high temp silicone (I use pro seal as used in karts) and it's fine.
Mine has the spring though, thought they all did ?
Mine has the spring though, thought they all did ?
- Mon Jan 02, 2017 9:28 pm
- Forum: Lambretta Tech
- Topic: Bgm Clubman
- Replies: 79
- Views: 22248
Re: Bgm Clubman
Also, arnt the BGM Pipes closer to 50 mm so better than the closer to 42mm scootopia pipes for kits 225 and above? I'd happily buy a scootopia pipe but I believe they would be too restrictive and possibly cause a build up of heat?
I'm sure an expert will be along soon who can verify
I'm sure an expert will be along soon who can verify
- Thu Dec 29, 2016 11:18 pm
- Forum: General Scooter Chat
- Topic: Spanish ser 2 mudguard
- Replies: 6
- Views: 2358
Re: Spanish ser 2 mudguard
It's only obvious when you know itDaggs wrote:Cheers whonatic. Fairly obvious when I think about it, doh!
- Thu Dec 29, 2016 11:06 pm
- Forum: General Scooter Chat
- Topic: Spanish ser 2 mudguard
- Replies: 6
- Views: 2358
Re: Spanish ser 2 mudguard
The rear muddy on my Spanish Li S2 has two large holes (approx 10mm) punched into the rear lower edge. Because they are punched not drilled, I'm assuming they are factory created. Does anyone know why they are there? They're to fit the rubber buffer (square black rubber block) that fits between the...
- Fri Nov 25, 2016 10:21 pm
- Forum: General Scooter Chat
- Topic: Gp chrome
- Replies: 30
- Views: 7137
Re: Gp chrome
drunkmunkey6969 wrote:dazblakey wrote:
Seen this one
Sent from my D6603 using Tapatalk
No............no, no, no, no.
No.
White walls on GP for christs sake no !
Sent from my iPhone using Tapatalk
- Sun Nov 20, 2016 8:09 am
- Forum: Lambretta Tech
- Topic: Drive side bearing
- Replies: 2
- Views: 1381
Re: Drive side bearing
Cheers Adam
- Sat Nov 19, 2016 11:14 pm
- Forum: Lambretta Tech
- Topic: Drive side bearing
- Replies: 9
- Views: 3270
Re: Drive side bearing
Ok good advice cheersrosscla wrote:You need to make sure the halite washer is being compressed by the seal plate.