Search found 209 matches
- Mon Dec 12, 2016 6:49 pm
- Forum: Lambretta Tech
- Topic: DIy cheap thumb choke conversion
- Replies: 14
- Views: 5139
Re: DIy cheap thumb choke conversion
and fzr600 is a crackin version martin
- Mon Dec 12, 2016 6:12 pm
- Forum: Lambretta Tech
- Topic: DIy cheap thumb choke conversion
- Replies: 14
- Views: 5139
Re: DIy cheap thumb choke conversion
BSA thumb choke £12.00 ebay . Shimano SIS gear cable inner outer £3 nylon lined with a stainless cable. Cable nipple filed down to fit in choke jet. Small solderless nipple at thumb choke end with a groove cut into chock lever to allow cable adjustment.Its a handlebar type bracket so I binned the lo...
- Mon Dec 12, 2016 4:41 pm
- Forum: Lambretta Tech
- Topic: DIy cheap thumb choke conversion
- Replies: 14
- Views: 5139
- Sat Dec 10, 2016 6:59 pm
- Forum: General Scooter Chat
- Topic: packing plate
- Replies: 4
- Views: 1822
Re: packing plate
oiltek
- Sun Nov 13, 2016 7:27 pm
- Forum: Carburettor Set-ups
- Topic: atomiser needle combo away from the norm
- Replies: 5
- Views: 3865
Re: atomiser needle combo away from the norm
Better to ride safe when ridin hard - not arsed about smooth low down runnin , more concerned with getting heat into exhaust rather than combustion chamber- so what if it drops to 13 degrees. All the best
- Sat Nov 12, 2016 1:53 pm
- Forum: Carburettor Set-ups
- Topic: atomiser needle combo away from the norm
- Replies: 5
- Views: 3865
Re: atomiser needle combo away from the norm
stuck bike back on dyno with setup as follows. ( big thanks for Rob opening school up to let me use the dyno , by the way ) AV270 , x7 p2 , 140 MAIN , 55 pilot, 1.75 air screw, 19 degrees static with augusto 6000, NK rally.2.5 packer to bring exhaust asnd transfer timings down. Motor leak free - AFR...
- Fri Nov 04, 2016 6:07 pm
- Forum: Lambretta Tech
- Topic: Miss firing between 4K-4.5k RPM
- Replies: 4
- Views: 2549
Re: Miss firing between 4K-4.5k RPM
I';ve got same prob which can only be erradicted by leaning to dangerous limits . tried different pipes, carbs & Cdi's but to no avail, gonna try stator but i believe the issue to be deeper than that.
- Tue Oct 25, 2016 5:29 pm
- Forum: Carburettor Set-ups
- Topic: atomiser needle combo away from the norm
- Replies: 5
- Views: 3865
Re: atomiser needle combo away from the norm
Nice guess there . But not even on the main when 4k issues start. Its a mid range (needle atomiser problem). Exh port TF timings brought down now by a further 5 degrees but problem persists. See top of post for the best useable setup, but still nearly 13:1 afr in mid range throttle when power starts...
- Thu Oct 20, 2016 6:36 pm
- Forum: Lambretta Tech
- Topic: Maximum revs?
- Replies: 4
- Views: 2160
Re: Maximum revs?
http://www.henryarmer.com/sendec_2_new_.htm
best by far of low budget rpm meters 9 abillion farmers cant be wrong ! run these on both my scoots - brilliant get 25hr one
best by far of low budget rpm meters 9 abillion farmers cant be wrong ! run these on both my scoots - brilliant get 25hr one
- Fri Oct 14, 2016 6:32 pm
- Forum: Lambretta Tech
- Topic: Race Tour Pistons
- Replies: 34
- Views: 13364
Re: Race Tour Pistons
mate of mine showed me his 3 racetour pistons all with failed pegs. all ridden fast but not excessive miles but all failed he's now gone wossner.