Scooterotica

Padge

you either need a NU2205E bearing or one of these and the bearing you have
https://www.beedspeed.com/lambretta-mag ... mt1tp5jj90

Padge

would help if we knew what jetting/needle you're running

Padge

just order normal TS1 piston rings and gap accordingly

Padge

use fine line masking tape, paint both your base colours then lacquer, you will still have a "ridge" so personally I "flow coat" it by dry flatting the whole panel back with 800 grit (when lacquer cured) then another 2 coats of lacquer that will get rid of the ridge and also prot...

Padge

it worked fine with the earth sorted out, mine was on n AC system, but I have fit them to bikes with DC and not had a problem

Padge

I had a similar problem and it turned out to be a bad earth on my Augusto unit

Padge

thanx, just in the process of painting my mates gp before I do my other one....hope to have it done before the season starts

Padge

This is one of mine, its all done in direct gloss 2k except the silver which is done in clear over base with gloss anti scratch lacquer
viewtopic.php?f=10&t=36783

Padge

ALL 2k metallic's and pearls are "clear over base" or "2 stage" they dry totally matt and need to be clear coated, you can have matt, satin or gloss finish. most 2k solid colours are "direct gloss" although you can get 2 stage solid colours

hope that helps

Padge

As coaster said, etch primer is designed for bare metal, I wouldn't use an acid etch primer over any paint, personally I wouldn't use primer out of rattle cans (except to dust over if I cut through any primer) you should be ok with a 2k high build primer though or you could just use a "1K"...

Search found 117 matches

Re: help crankshafts

Re: Carb issues

Re: Compression on TS1?

Re: Two colour panel

Re: Agusto 6000 problem?

Re: Agusto 6000 problem?

Re: Hubs matt laquer or gloss finish

Re: Hubs matt laquer or gloss finish

Re: Hubs matt laquer or gloss finish

Re: painting over 2 pack

Login • Register

Advertising