Search found 1293 matches
- Fri Jul 05, 2019 3:43 pm
- Forum: General Scooter Chat
- Topic: Re registration to a 125
- Replies: 8
- Views: 5154
Re: Re registration to a 125
Get a "reputable" garage to write a later saying it's a 125.....send the letter with the proper form (V5).....job done
- Sat Jun 29, 2019 3:52 pm
- Forum: Lambretta Tech
- Topic: Avanti Upgrade
- Replies: 15
- Views: 5434
Re: Avanti Upgrade
In WT's defence:
The Avanti's aren't a standard reed kit, so a standard Avanti piston will not have the reed holes. If an Avanti kit was changed to a reed valve then the piston shown would probably be suitable...........best to give Ron a call though.
The Avanti's aren't a standard reed kit, so a standard Avanti piston will not have the reed holes. If an Avanti kit was changed to a reed valve then the piston shown would probably be suitable...........best to give Ron a call though.
- Sun Jun 23, 2019 3:23 pm
- Forum: Lambretta Tech
- Topic: Timing, Dial Gauge or Degree Disc
- Replies: 27
- Views: 9445
Re: Timing, Dial Gauge or Degree Disc
The post is 10 years old. Things have moved forward, well retarded actually.servetaeire wrote: ↑Sun Jun 23, 2019 3:16 pm ok i get it so why areother people saying set your deg to 17 btdc
- Thu Jun 20, 2019 9:21 pm
- Forum: Lambretta Tech
- Topic: Rear Hub Bearing advice
- Replies: 2
- Views: 1603
Re: Rear Hub Bearing advice
Similar thread on the LCGB a couple of weeks ago.......the consensus was don't touch them......but a phone call to AF would be advised.
- Fri Jun 14, 2019 8:59 pm
- Forum: Lambretta Tech
- Topic: ST90 vs SAE30
- Replies: 13
- Views: 6645
Re: ST90 vs SAE30
Doesn't really answer the question .
Is ST90 a compatible replacement ?
Interesting, i'ld like to know as well.
Is ST90 a compatible replacement ?
Interesting, i'ld like to know as well.
- Tue Jun 11, 2019 6:44 pm
- Forum: Lambretta Tech
- Topic: Lambretta crank induction with Malossi MHR 221
- Replies: 34
- Views: 20741
Re: Lambretta crank induction with Malossi MHR 221
All comments are much appreciated
- Sun Jun 09, 2019 4:05 pm
- Forum: Vespa Tech
- Topic: 210 polini alloy cold start issue
- Replies: 10
- Views: 9633
Re: 210 polini alloy cold start issue
Cut and pasted after a Google search (took about 10 seconds): Swarf - Wikipedia https://en.wikipedia.org/wiki/Swarf Swarf, also known as chips or by other process-specific names (such as turnings, filings, or shavings), are pieces of metal, wood, or plastic that are the debris or waste resulting fro...
- Sun Jun 09, 2019 2:26 pm
- Forum: Lambretta Tech
- Topic: Lambretta crank induction with Malossi MHR 221
- Replies: 34
- Views: 20741
Re: Lambretta crank induction with Malossi MHR 221
https://live.staticflickr.com/65535/48030066957_4b0a3259ac.jpg IMG_20190520_184206 by mick leaf , on Flickr https://live.staticflickr.com/65535/48029866963_83a51dcb6b.jpg IMG_20190520_184156 by mick leaf , on Flickr https://live.staticflickr.com/65535/48029839651_882fd447fc.jpg IMG_20190522_155125 ...
- Sun Jun 09, 2019 2:20 pm
- Forum: Lambretta Tech
- Topic: Lambretta crank induction with Malossi MHR 221
- Replies: 34
- Views: 20741
Re: Lambretta crank induction with Malossi MHR 221
So i could test drive it i needed a petrol tank. With the quirkiness of the frame i decided to make my own. First i made a template out of a cardboard folder: ImageIMG_20190520_184206 by mick leaf, on Flickr ImageIMG_20190520_184156 by mick leaf, on Flickr Nice fit in the frame ImageIMG_20190522_155...
- Tue Jun 04, 2019 11:59 am
- Forum: Vespa Tech
- Topic: 210 polini alloy cold start issue
- Replies: 10
- Views: 9633
Re: 210 polini alloy cold start issue
I'd be looking at the choke. Is it working correctly, correct size ?