Hi all
I'm fitting some replica floorboard extensions to one of my lambrettas a series 3 special and I'm having an issue with the kickstart being to close and fouling. Any suggestions on what kickstart pedal I could use. The runners are made stainless type.
Many thanks
Search found 82 matches
- Fri Feb 20, 2015 6:58 pm
- Forum: Lambretta Tech
- Topic: Lambretta li special series 3 kickstart fouling
- Replies: 1
- Views: 970
- Sat Feb 14, 2015 10:45 pm
- Forum: Lambretta Tech
- Topic: What is the best 12v conversion gear?
- Replies: 19
- Views: 7664
Re: What is the best 12v conversion gear?
Hi New electronics can be a bit of a luck of the draw like of lot new stuff however I've had an Indian 12 volt with upgraded CDI etc to Ducati which was really realiable and I have a BGM which in my humble opinion is the best electronic I've ever had especially coupled with the led rear light . Cheers
- Thu Jan 29, 2015 1:24 pm
- Forum: Lambretta Tech
- Topic: Indian GP,s (vijays etc )
- Replies: 8
- Views: 4043
Indian GP,s (vijays etc )
hi all Apologies i expect this has been done to death can somebody point me I the direction of decent importers of Indian lambrettas I've seen a few on e bay don't mind if it's a 150cc I'm looking to change the engine anyway do resto anyway I'm bit cautious to import some I've seen on eBay for £1500...
- Tue Oct 07, 2014 11:59 am
- Forum: Lambretta Tech
- Topic: BGM pro 6ts slim dampers
- Replies: 4
- Views: 2325
BGM pro 6ts slim dampers
Hello
I'm trying to source bgm slim 6ts front dampers Mb is out of stock does anybody know where I can obtain some ? I don't think they have any in Germany either .
Thanks for your help
I'm trying to source bgm slim 6ts front dampers Mb is out of stock does anybody know where I can obtain some ? I don't think they have any in Germany either .
Thanks for your help
- Sat Sep 27, 2014 3:18 pm
- Forum: Lambretta Tech
- Topic: 30mm dellorto disadvantage of fitting wire mesh under belmth
- Replies: 12
- Views: 5403
30mm dellorto disadvantage of fitting wire mesh under belmth
Hello I've been running my GT 186 for a while now with a 30mm dellorto without a filter with full panelwork , performs really well and I don't want to use a remote foam filter bikes been dynoed I'm just concerned recently after riding on newly gritted road surfaces whether I should be fitting a wire...
- Sun Jul 27, 2014 6:19 pm
- Forum: Lambretta Tech
- Topic: 30mm carb rubber
- Replies: 0
- Views: 759
30mm carb rubber
Hi all
I need to obtain a spare rubber mount for a 30mm PHBH dellorto ( ? ) fits on to a manifold for a GT 186 kit any suggestions where to purchase do they vary in quality .
Thanks
I need to obtain a spare rubber mount for a 30mm PHBH dellorto ( ? ) fits on to a manifold for a GT 186 kit any suggestions where to purchase do they vary in quality .
Thanks
- Thu Jul 10, 2014 7:05 pm
- Forum: Lambretta Tech
- Topic: socket size range
- Replies: 11
- Views: 3881
socket size range
Hello All Apologies if this has been covered , could any body suggest a good size range of sockets and ring spanners to carry in the toolbox .I have purchased a stubby wratchet ( 1/4" drive i think ) . I know you cant cater for all every any ideas i couldnt find the info in the sticky book . Re...
- Sun Apr 27, 2014 2:23 pm
- Forum: Lambretta Tech
- Topic: mb/bgm clubman -175
- Replies: 17
- Views: 5324
Re: mb/bgm clubman -175
I have been using a a V.2 MB/BGM clubman for a little while now on a GT 186 kit with a 30mm delly and for me it has a much better spread of power than the AF , i thought the AF was good with a 25mm delly but the MB coupled with this kit and carb pulls like a train . mine fitted really well even thou...
- Wed Mar 12, 2014 6:48 pm
- Forum: Lambretta Tech
- Topic: Halogen bulb / xenon bulb
- Replies: 2
- Views: 1393
Halogen bulb / xenon bulb
Hi all Here we go ! Thought I would tray an upgrade my my front bulb from a standard 12 volt set up to something a bit brighter after hearing and reading good things about the xenon one reed speed do and also the Alford's type. Fitted the xenon low beam worked for a while tried the halfords nothing ...
- Sat Feb 15, 2014 1:53 am
- Forum: Lambretta Tech
- Topic: LED rear light conversions
- Replies: 34
- Views: 7634
Re: LED rear light conversions
Hello chaps i am on my second BGM unit ( first one stopped after about 3 months ?? it was cheaper to replace ) i think i must have been unlucky. The second one i have fitted i used some silicon thinking vibrarion may have been an issue and i havent had any problems still works great one of the best ...