Search found 59 matches
- Sun Feb 05, 2017 4:49 pm
- Forum: Scooterotica Tuning & Maintenance Information
- Topic: Looking for dyno recommendations
- Replies: 8
- Views: 4437
Looking for dyno recommendations
Where would people recommend around west/north yorks/ lancs for a dyno session? Not sure if sean does them at harrogate now dan is no longer there?
- Tue Jan 31, 2017 8:54 pm
- Forum: Lambretta Tech
- Topic: Difficulty starting. Ruling out the easy stuff first..
- Replies: 27
- Views: 9794
Re: Difficulty starting. Ruling out the easy stuff first..
Was about to suggest a kinked fuel pipe but it sounds like you got it sorted
- Tue Jan 24, 2017 3:35 pm
- Forum: Vespa Tech
- Topic: Increase carb size on 177 kit
- Replies: 5
- Views: 4267
Re: Increase carb size on 177 kit
cheers all. looking at these from SIP, looks like a good upgrade to the std 24mm unit
http://www.sip-scootershop.com/main/bas ... anguage=en
http://www.sip-scootershop.com/main/bas ... anguage=en
- Mon Jan 23, 2017 6:25 pm
- Forum: Vespa Tech
- Topic: Increase carb size on 177 kit
- Replies: 5
- Views: 4267
Increase carb size on 177 kit
I'm running a P125 kitted with a pinasco 177 top end and a SIP Road2, no other mods. Would swapping from a 20/20 carb to 24/24 be a worth while mod to add a little bit more grunt? Also what would be recommend jet stack for this - stick with what comes as std with the 24/24 which is a 116 main or wou...
- Wed Sep 28, 2016 9:20 pm
- Forum: Rallys, Rideouts and Club Meets.
- Topic: Morecambe’s Official Pre-Season Scooter event.
- Replies: 6
- Views: 3736
Re: Morecambe’s Official Pre-Season Scooter event.
Sounds promising, all the best with this I'm sure it will get plenty of support. Morecambe has memories for lots of us
- Wed Aug 24, 2016 6:52 pm
- Forum: Vespa Tech
- Topic: Px125/150 upgrade.
- Replies: 11
- Views: 5377
Re: Px125/150 upgrade.
The one thing i would say is that the 24g T5 is not easy to set up correctly for a PX. The range of jets available is much smaller. You would be better off going with the 24/24 P200 carb
- Fri Jul 08, 2016 7:52 pm
- Forum: Vespa Tech
- Topic: base gaskets
- Replies: 5
- Views: 2623
Re: base gaskets
I'd be interested to know exactly what it is about them that you dont like? Base gasket failures aren't something you hear about very often. If your barrel isnt coming off its a fit & forget kind of component
- Tue Jun 02, 2015 6:51 pm
- Forum: Vespa Tech
- Topic: Base Gasket Leak?
- Replies: 6
- Views: 3846
Re: Base Gasket Leak?
Pics have gone but id be interested in seeing thrm as ive got similar issues
- Thu Apr 30, 2015 1:37 pm
- Forum: Vespa Tech
- Topic: clutch adjustment?
- Replies: 8
- Views: 3153
Re: clutch adjustment?
Yep cable could be fraying which means it stretches rather than pulling. Have you got a top hat on thr outer at the headset end?
- Wed Apr 29, 2015 9:55 pm
- Forum: Vespa Tech
- Topic: PX200 jumping into gear
- Replies: 4
- Views: 2674
Re: PX200 jumping into gear
Seems like a change of layshaft has solved it, cheers for the advice