Search found 137 matches

by 225worb
Fri Nov 18, 2011 9:01 pm
Forum: Vespa Tech
Topic: Rally 200 ignition cam set up
Replies: 1
Views: 1330

Rally 200 ignition cam set up

I cant seem to find the right way of putting the ignition cam on the crankshaft, the key way is offset to either the right side (turn the can around ) or the left side ?????? i didnt realise this and it has to be right of course because once the ive put the cam on the crank it wont come off very eas...
by 225worb
Wed Nov 09, 2011 7:09 pm
Forum: Vespa Tech
Topic: Best Clutch solution for 18+ BHP
Replies: 19
Views: 5238

Re: Best Clutch solution for 18+ BHP

Thats right with what Oz has said toooooo with regards to using 3 plate rather than 4 plate , its just what i have in mine at present
by 225worb
Wed Nov 09, 2011 7:05 pm
Forum: Vespa Tech
Topic: Best Clutch solution for 18+ BHP
Replies: 19
Views: 5238

Re: Best Clutch solution for 18+ BHP

jonny snatchsniffer wrote:cos hes limp wristed
Ah monsour Johnny, hows the ankle :roll:
by 225worb
Tue Nov 08, 2011 3:04 pm
Forum: Vespa Tech
Topic: Best Clutch solution for 18+ BHP
Replies: 19
Views: 5238

Re: Best Clutch solution for 18+ BHP

im running standard genuine clutch with 4 plates with 4 strong springs and 3 lighter springs and thats handling 26.5bhp oh and make sure youf soak the plates for 24hrs or more
by 225worb
Tue Nov 08, 2011 2:49 pm
Forum: Vespa Tech
Topic: Malossi 210 barrel
Replies: 6
Views: 2195

Re: Malossi 210 barrel

dude thats got loads of use left it, they are pretty robust though the pistons i find crack under the ring piece lands, just polish out the rough edges of the score then stick her back together :fb:
by 225worb
Sun Dec 20, 2009 7:59 pm
Forum: Vespa Tech
Topic: Water Cooled Suzuki 220 MRB
Replies: 88
Views: 31177

Re: Water Cooled Suzuki 220 MRB

Just gone through and had a good read and look and the unfortunate cracks and breakages ! ! Doh ! I had a similar engine misshap on my malossi 225 .... First noticed that there was a hairline crack inside the crankcase mouth when is had to replace the ring pieces , i thought Na ! that'll be fine as ...
by 225worb
Thu Dec 03, 2009 9:22 pm
Forum: Lambretta Tech
Topic: Lambretta GP 500
Replies: 21
Views: 7608

Re: Lambretta GP 500

Mate of mine has put a Husky 500 2-stroke into a ful bodied lambretta :o .. Took it to Santa Pod a few years back and i took it the strip a couple of times .....its was fooooking awesome with plenty of rear wheel spin and plenty of leaning over the front ..and only a drum front brake :shocking: