Scooterotica

jonbus

picked up a li horncast with cast number 19950117 and a rectangle hole for the horncasting badge.is this one from the series 4 models?

jonbus

:biggrin:

jonbus

has anyone tried out the siagon scooters copy of the taffspeed exhaust? they seem to look ok.

jonbus

any info on the year it was made arka? it is mint.piston is bad thou,casings are in good nick.

jonbus

yes 600 700 is cool,tried to fix it today,running at 50mph gives me over 6000 revs which is wrong,i have a jet 200 engine which should read mph equal too revs roughly.try again tmrow.50 mph should be 5000 revs,55mph 5500 revs etc.

jonbus

ive fitted a bgm 80 stator and my rev readings have gone wonky as well.i will try the 2.0 ppr setting on the vapor today,if its still reading wrong i will get a new sensor cable.

jonbus

picked up a serveta engine with engine number 800*** i thought they they all started at 500? the mag housing has a hole at the bottom which i was told was for an electric start.anyone have any info.

jonbus

log on to the old lcgb forums.do a search for compressor,and you will find all you need on the 3rd page m8.

jonbus

mines was the same,maybe your struts are out a bit.i tried new spring and it just hung the same as you describe.to cure it i found and old bed spring and it worked.stand no longer hangs down and drags going round corners.it sits nicly under the rear runner now as it should.

jonbus

nice one dapper.will make a few and you will get one m8.wqill pm you wen the jobs done,few weeks thou

Search found 32 matches

horncast number

Re: taffspeed copy

taffspeed copy

Re: serveta

Re: TrailTech Vapor settings help.

Re: TrailTech Vapor settings help.

serveta

Re: Fork spring compressor

Re: Rattling Stand

Re: fork compressor dimensions

Login • Register

Advertising