Search found 34 matches

by markd232
Fri Jan 15, 2010 5:19 pm
Forum: Lambretta Tech
Topic: nissin caliper
Replies: 11
Views: 3853

nissin caliper

Can anyone let me know where I can get a polished nissin caliper from (for my GP).Tried a serch on google and looked on flea bay with no joy.

Thanks
by markd232
Sun Dec 20, 2009 2:57 pm
Forum: Lambretta Tech
Topic: front disc bearings
Replies: 7
Views: 2198

Re: front disc bearings

Finally got the centre tube to move so can now get a drift behind the bearing.

Thanks
by markd232
Sun Dec 20, 2009 2:39 pm
Forum: Lambretta Tech
Topic: front disc bearings
Replies: 7
Views: 2198

Re: front disc bearings

Thanks for the comments, problem I have is that the centre bore of the hub is only 0.5mm larger than the i/d of the bearing. I think I will have to make an exandable pull rod to clamp on the i/d of the bearing, heat the hub up and pull the bearing out. After I get the bearings out I will drill the h...
by markd232
Fri Dec 18, 2009 9:33 am
Forum: Lambretta Tech
Topic: front disc bearings
Replies: 7
Views: 2198

front disc bearings

Good morning all, Can anyone help. I am trying to get the bearings out of my front hub which is a disc conversion (nissin) on my GP200, indian. Taken out the circlip from one side but the bearings seem to be pushed upto a sholder and there is no room to get a drift in from behind the bearing. Thanks...
by markd232
Mon Dec 07, 2009 4:13 pm
Forum: Lambretta Tech
Topic: jetex carb
Replies: 6
Views: 2527

Re: jetex carb

Bored carb out to 25mm and found slide sits nicely still. Going to run a 125 main jet and a 47 pilot jet + ram air filter. See how it goes. Because I am able to mod the carb myself it has worked out a very cheap improvement hopefully.
by markd232
Mon Nov 30, 2009 9:21 am
Forum: Lambretta Tech
Topic: jetex carb
Replies: 6
Views: 2527

Re: jetex carb

Thanks for that information rog60 I will be doing it today.
by markd232
Sun Nov 29, 2009 11:30 pm
Forum: Lambretta Tech
Topic: jetex carb
Replies: 6
Views: 2527

jetex carb

I have read on this site that you can bore out a 22mm jetex to about 25.4mm. Could someone tell me if the carb gets bored right along the 22mm length. :?:

Thanks
by markd232
Tue Oct 06, 2009 10:44 am
Forum: Lambretta Tech
Topic: Ideas for things to make
Replies: 38
Views: 5326

Re: Ideas for things to make

Sean,

How many brass pike nuts are you talking about + what thread + what a/f hex dim.
by markd232
Thu Oct 01, 2009 3:35 pm
Forum: Lambretta Tech
Topic: Master class on the lathe for a muppet required
Replies: 15
Views: 4583

Re: Master class on the lathe for a muppet required

Where abouts are you David ?
by markd232
Tue Sep 29, 2009 10:00 am
Forum: Lambretta Tech
Topic: Recommendation for parting tool
Replies: 13
Views: 3895

Re: Recommendation for parting tool

No problem Dave, hope you have some fun, nothing better than designing, manufacturing and then using a part you made yourself.