Search found 321 matches
- Tue May 20, 2014 8:00 pm
- Forum: Lambretta Tech
- Topic: Scootrs outboard disc EBC pads?
- Replies: 11
- Views: 5191
Re: Scootrs outboard disc EBC pads?
Is that it? I tried FA197 and the pads were way too thick.
- Tue May 20, 2014 7:47 pm
- Forum: Lambretta Tech
- Topic: clutch slip again
- Replies: 10
- Views: 4485
Re: clutch slip again
^ good idea, that, as in the last two days there has been a bit of a shudder when riding the bike at less than hooligan behaviour. The last time this happened the rivets on the spider had worked loose. I had that welded, though, so I doubt it's the spider.
- Tue May 20, 2014 7:36 pm
- Forum: Lambretta Tech
- Topic: GT big block experiance : New GT crank info added
- Replies: 516
- Views: 183942
Re: GT big block experiance
How can Shell call that shite fuel saver? If it has a higher ethanol content then cars will get worse fuel economy and use more fuel. The oil companies like that. In the USA I experienced 10% worse fuel economy when running E10 compared to running non-ethanol gasoline in my '89 Honda Civic. I only r...
- Tue May 20, 2014 6:28 pm
- Forum: Lambretta Tech
- Topic: clutch slip again
- Replies: 10
- Views: 4485
Re: clutch slip again
Have you tried Adige carbon mesh plates? They are very new and I know nothing about them, but Dean Suinn in LA once had Barnett make some carbon Lambretta clutch plates which didn't slip but turned out to be too grabby. http://www.mitolambretta.com/product_info.php?cPath=39&products_id=232 I'm i...
- Wed Feb 26, 2014 2:25 pm
- Forum: Dealer News, Innovations & Products
- Topic: New Rear Shock from Readspeed
- Replies: 30
- Views: 12448
Re: New Rear Shock from Readspeed
Guys, Asia is a big place, err, continent. It includes places like Japan, whence come excellent products, and places with lower technology / much cheaper labour rates, and places in between. Most of Russia is in Asia. I don't hear many scooterists saying that the connecting rod in their Lambretta's ...
- Sun Feb 23, 2014 3:26 pm
- Forum: Lambretta Tech
- Topic: PM Tuning headlamp?
- Replies: 16
- Views: 6382
Re: PM Tuning headlamp?
Do you mean just the plastic bulb holder is discoloured? Did it affect the reflector or the lens?
- Sat Feb 22, 2014 12:54 pm
- Forum: Lambretta Tech
- Topic: Misano Supercases.....
- Replies: 50
- Views: 24531
Re: Misano Supercases.....
Ouch, I hope you are recovering well, Siobhan. Any idea when these will make production?
- Sat Feb 22, 2014 12:33 pm
- Forum: Lambretta Tech
- Topic: Any ts1 tips please
- Replies: 7
- Views: 2665
Re: Any ts1 tips please
My old TS1 200 is now a 230 at 71 mm bore. Once this has worn out I should have saved enough for a Super Monza.
- Tue Feb 18, 2014 2:07 pm
- Forum: Lambretta Tech
- Topic: LED rear light conversions
- Replies: 34
- Views: 7628
Re: LED rear light conversions
I have Lofty's prototype in my GP200 and it was bright and freed up enough power to run a 50 watt halogen bulb. I'm going to convert the street racer to a BGM board someday. They I'll run a brighter headlamp on that, too. Halogen bulbs use a filament, they're just filled with halogen gas, the focus ...
- Tue Feb 18, 2014 2:00 pm
- Forum: Lambretta Tech
- Topic: Nissin disc brake caliper - whats it off?
- Replies: 6
- Views: 2308
Re: Nissin disc brake caliper - whats it off?
If it's the same as the one on the ScootRS brake, then it's probably off a Honda NSR 125/150.