Search found 139 matches
- Sun Nov 17, 2019 11:50 pm
- Forum: Vespa Tech
- Topic: PX front brake light switch
- Replies: 2
- Views: 1651
Re: PX front brake light switch
Of i remember correctly it's just a plastic housing with a spring in the middle, a connection is made between 2 spade connectors when the spring is compressed
- Fri Sep 27, 2019 3:45 pm
- Forum: Vespa Tech
- Topic: Kick starting Classic Vespa
- Replies: 1
- Views: 1706
Re: Kick starting Classic Vespa
Always start it this way, never on the stand. Half because I don't want to slowly damage the stand or frame, and half because I use a side stand most of the time. (my side stand is heavily strengthened to reduce any frame twist)
- Tue Sep 24, 2019 9:08 pm
- Forum: General Scooter Chat
- Topic: Dyno Graph - Small Frame
- Replies: 4
- Views: 7680
Re: Dyno Graph - Small Frame
Hi so I've had a reply from the owner Carb make/model: Stage6 PWK 26mm Main jet:118 Pilot jet:38 Atomiser: unknown Float needle valve: unknown Slide:unknown Needle: E Clip setting: top Airscrew (or mix screw) turns out: 1.5 Air filter Y/N: N Have asked him to hang the carb over a pint glass with the...
- Tue Sep 24, 2019 10:25 am
- Forum: General Scooter Chat
- Topic: Dyno Graph - Small Frame
- Replies: 4
- Views: 7680
Re: Dyno Graph - Small Frame
Thank you Mr munky! I've contacted the owner to ask for full carb spec and will be back ASAP. I also thought fuel flow but as the scoot is fitted with a fast flow tap and with the carb being situated down by the kick start I didn't think it likely--though now you've said it I wonder if the fuel inle...
- Tue Sep 24, 2019 8:36 am
- Forum: General Scooter Chat
- Topic: Dyno Graph - Small Frame
- Replies: 4
- Views: 7680
Re: Dyno graph is
Here's the graph, any ideas:
- Mon Sep 23, 2019 10:02 pm
- Forum: General Scooter Chat
- Topic: Dyno Graph - Small Frame
- Replies: 4
- Views: 7680
Dyno Graph - Small Frame
Hi Guys, Dynoed a small frame I built today, runs a champ but has a jetting problem I can't quite grasp. AFR leans out at around 65mph in 4th not sure of RPM without looking it up. What I'm not sure about is why it seems to only happens in 4th and not at the same RPM in each gear. Dyno operator thou...
- Wed Aug 28, 2019 4:26 pm
- Forum: Rallys, Rideouts and Club Meets.
- Topic: BSRA 6: Isle of Wight 22nd - 26th Aug
- Replies: 2
- Views: 4933
Re: BSRA 6: Isle of Wight 22nd - 26th Aug
I enjoyed it a lot, well done VFM
- Wed Aug 21, 2019 5:48 pm
- Forum: General Scooter Chat
- Topic: Mod 1 and 2 On Scooter
- Replies: 12
- Views: 6508
Re: Mod 1 and 2 On Scooter
Good luck buddy, you'll be a better rider for it
- Tue Aug 20, 2019 2:38 pm
- Forum: Vespa Tech
- Topic: Malossi 166
- Replies: 2
- Views: 2171
Re: Malossi 166
Sounds like the fuel feed hole between the float bowl and the jet stack has reached its limit, has it been drilled to 2.5mm?
- Tue Aug 20, 2019 2:33 pm
- Forum: General Scooter Chat
- Topic: Mod 1 and 2 On Scooter
- Replies: 12
- Views: 6508
Re: Mod 1 and 2 On Scooter
You can do it, no problem. You'll struggle with the speed trap an mod1 if yours is standard, and you'll need mirrors,. You'll only be able to get an a1 license, meaning restricted to a 125, but- You'll never have to do a cbt again You'll never have to use L plates You can take a passenger You can tr...