Scooterotica

GP240

Lambretta plug,
NGK B8es,
Champion N4c (copper core).
if running with a SIP speedo then a resistor type is adviced.

GP240

I lost 2 off the rear wheel (at the same time) with 'Nordlock' washers, I replaced with 2 I had on my spare, Not sure if I had tightened up enough but when I put the spare 2 on I give a bit more with the 'elbow grease' and heard the lock washers give a loud click. I went round and did the same to th...

GP240

No, not the gas-gas, the guy who run the dyno had a modern street bike/racer under a cover. I think it was an Aprillia based bike but the engine had a Rotax 250 top-end grafted on it. The owner said he had 45hp out of it. Eden will fill in the gaps. The gas-gas in the Lammy frame is/was a trials eng...

GP240

Eden, the lad who did the dyno had a modern race bike with a Rotax 250 cylinder on a (I think) Aprillia engine, did he say he got 45hp out of his. think it was an ex cart top-end (watercooled). I had a look at it but didn't ask him.

GP240

That is the correct way they should be, to prevent the engine case from touching the frame. Eliminate vibration (=silent block).

noticed you have a 'F' stamped above the mount, often wondered what this meant, other casings have a letter stamped above the casing lower damper mount.

GP240

Just found it (me being a lazy arse)
cheers the-brickie
http://www.tkrj.co.jp/goods/m-AS0810X--30510.php
18X55 gudgeon pin.

GP240

Bringing this conversion back up to date, I have a complete kit which I'm about to build to a casing. Crank = 58/110 (Ape rod) with 18mm eye, TS250 70mm piston and barrel bored to225. The piston came with a 16mm pin to fit a standard rod with brass top-hats/sleeve (18mm) which are fitted from the ou...

GP240

Sorry to hear about your friend, shame he never got to see it finished.

I too have No engine number, V5 says 'Not stated' (bought scoot like that).

Deffo try an have a chat with Rob.

Best 38p a week I ever spent.

GP240

Have you strobed the timing ?
I dont know what the low/high revs timing should be but just wondered if it has been checked.

GP240

and finds time to practice what he preaches, many thanks from Manny too.

Search found 149 matches

Re: LAMBRETTA PLUG GRADE????

Re: sip stud.nuts coming undone

Re: exotic cylinder conversion mystery ?

Re: exotic cylinder conversion mystery ?

Re: BGM silent blocks too big?

Re: rd400 rod with suzuki ts 250 piston

Re: rd400 rod with suzuki ts 250 piston

Re: No engine number.

Re: Pinking

Re: Corrado. - Just Lambretta

Login • Register

Advertising