Search found 578 matches
- Sun May 24, 2015 5:48 pm
- Forum: Vespa Tech
- Topic: Autolube
- Replies: 2
- Views: 1521
Re: Autolube
I just take the cog off in the engine , not the one under the clutch!! Then silicone up the channel under carb. Don't like disabling them , as are a bloody god send and work perfect!
- Tue May 19, 2015 5:40 pm
- Forum: Vespa Tech
- Topic: SIP and BGM Clutches
- Replies: 15
- Views: 5915
Re: SIP and BGM Clutches
Same as Gaz , cosa in a tuned polini 210, no problems had one in my mallossi for years also.
I know they can be a bit hit and miss especially with clearance issues in the basket, but all easy to sort when on the bench.
I run BGM springs and normal newfren plates , all good.
I know they can be a bit hit and miss especially with clearance issues in the basket, but all easy to sort when on the bench.
I run BGM springs and normal newfren plates , all good.
- Sat May 16, 2015 8:30 am
- Forum: Vespa Tech
- Topic: Fuel starvation?
- Replies: 23
- Views: 10370
Re: Fuel starvation?
Sounds more like your pilot jet blocked mate.
At them low speeds the vespa fuel tap is fine , it's only when you're above half throttle and below half a tank of fuel you'll get issues with starvation. Usually it will be pinking its head off!!
At them low speeds the vespa fuel tap is fine , it's only when you're above half throttle and below half a tank of fuel you'll get issues with starvation. Usually it will be pinking its head off!!
- Mon May 04, 2015 5:37 pm
- Forum: General Scooter Chat
- Topic: Motorcycles
- Replies: 135
- Views: 49612
Re: Motorcycles
double h wrote:Janet showed me your fb posts. You are a two wheeled Hard core type of guy Bazbazman wrote:My new one , this weekend
loving it 675 miles this weekend , effortless 
- Sun May 03, 2015 9:39 pm
- Forum: General Scooter Chat
- Topic: Motorcycles
- Replies: 135
- Views: 49612
Re: Motorcycles
My new one , this weekend
- Wed Apr 08, 2015 7:09 am
- Forum: Vespa Tech
- Topic: Delving into VSE1M
- Replies: 82
- Views: 25118
Re: Delving into VSE1M
Spot on Paul!!
See you c2c?
See you c2c?
- Mon Mar 30, 2015 7:41 pm
- Forum: General Scooter Chat
- Topic: Conti tyres
- Replies: 12
- Views: 4983
Re: Conti tyres
Agree re the twists in damp or wet, don't know if they've changed but not a fan , very skitty.
Have the 365's on mine , feel a bit weird to be honest , can't put my finger on it , have been on semi slicks for years , so maybe not used to the chunky tread ?
Have the 365's on mine , feel a bit weird to be honest , can't put my finger on it , have been on semi slicks for years , so maybe not used to the chunky tread ?
- Tue Mar 24, 2015 8:49 pm
- Forum: Vespa Tech
- Topic: Delving into VSE1M
- Replies: 82
- Views: 25118
Re: Delving into VSE1M
Good stuff mate , disagree re fitment and adjustment though,
Piece of p155 to set up , fit 2 trunnions , tighten up cable to the max then just slacken the last trunnion off a tad if too tight then move the first down.
Piece of p155 to set up , fit 2 trunnions , tighten up cable to the max then just slacken the last trunnion off a tad if too tight then move the first down.
- Fri Mar 20, 2015 6:44 pm
- Forum: Vespa Tech
- Topic: fitting a fuel pump to stock fitting carb
- Replies: 35
- Views: 12919
Re: fitting a fuel pump to stock fitting carb
Before you go spending the cash and getting this , that and the next thing , best to check your flow rate first .
SIP taps are , how shall I say it ....
SIP taps are , how shall I say it ....
- Wed Mar 18, 2015 6:45 pm
- Forum: Vespa Tech
- Topic: fitting a fuel pump to stock fitting carb
- Replies: 35
- Views: 12919
Re: fitting a fuel pump to stock fitting carb
Classic case of fuel starvation. Fit a fast flow BGM tap and this should suffice.