Search found 368 matches
- Sun Apr 05, 2009 2:55 pm
- Forum: Lambretta Tech
- Topic: filter for a Dellorto
- Replies: 5
- Views: 1970
Re: filter for a Dellorto
I got a flat round fillter from the local off road bike shop, i think it was £8, it fits on the plastic thingy that scews on the mouth of a 28mm phbh, if you shorten the inlet manifold it fits behind the panel. when i dynod it i tried the ramair on the elbow, then tried the flat round fillter, it l...
- Fri Apr 03, 2009 1:37 pm
- Forum: Lambretta Tech
- Topic: fast flow tap
- Replies: 14
- Views: 7071
Re: fast flow tap
My last 2 have had a rubber o ring for a seal.
- Fri Apr 03, 2009 8:39 am
- Forum: Lambretta Tech
- Topic: Crank swap.
- Replies: 5
- Views: 1892
Re: Crank swap.
If its an Indian crank it would be wise to have the bigend bearing changed, better safe than sorry.
- Fri Apr 03, 2009 8:36 am
- Forum: Lambretta Tech
- Topic: Sparkplug problems............
- Replies: 26
- Views: 8137
Re: Sparkplug problems............
Regarding the Nippon Denso,s if i remember rightly its a 24 for normal rideing and a 27 for the faster long range trips, if ive got that wrong could someone put me right, Ta.
- Thu Apr 02, 2009 2:46 pm
- Forum: Lambretta Tech
- Topic: reverse pull drum brake : good or not ?
- Replies: 4
- Views: 2459
Re: reverse pull drum brake : good or not ?
Ive just done one and to be honest its not that much better, shorter cable though so maybe less stretch, not rearly worth the effort IMO.
- Mon Mar 30, 2009 5:58 pm
- Forum: Lambretta Tech
- Topic: Sparkplug problems............
- Replies: 26
- Views: 8137
Re: Sparkplug problems............
Ive had trouble in the past with NGK plugs packing in for no good reason, i think there abit highly strung, i changed back to champion but have sinced gone to nippon denso,s after i went down the RB route, ive never had a denso fail yet, i recomend you give them a try , regards.
- Wed Mar 25, 2009 2:36 pm
- Forum: Lambretta Tech
- Topic: CEV rev counter
- Replies: 12
- Views: 4669
Re: CEV rev counter
Yep, thats the one simon, £14 off an italian guy on ebay, its a bit too big to fit in the top of a leggy toolbox, might make a bracket for it if i can get it to work properly and fix it to are lass,s legshield spare wheel thingy, regards.
- Wed Mar 25, 2009 9:35 am
- Forum: Lambretta Tech
- Topic: CEV rev counter
- Replies: 12
- Views: 4669
Re: CEV rev counter
I bought one of these a couple of years ago and could never get it to work, always read over 1,000rpms what ever i did, never threw it away though , i,ll have to have another play.
- Mon Mar 23, 2009 8:28 pm
- Forum: Lambretta Tech
- Topic: Spark Plug Cap (TS1)
- Replies: 5
- Views: 1555
Re: Spark Plug Cap (TS1)
The soft rubber NGK ones that you retain the bit on top of the plug are the best ive used.
- Sun Mar 22, 2009 11:22 am
- Forum: Lambretta Tech
- Topic: which legshield toolbox
- Replies: 11
- Views: 4666
Re: which legshield toolbox
Just a tip, get gen vespa toolbox rubbers, makes life alot easyer and they cover any small gaps twix toolbox and leggys.