Search found 139 matches
- Thu Apr 23, 2009 9:28 pm
- Forum: Lambretta Tech
- Topic: Wiring Electronic Kit To Series 1 Loom
- Replies: 8
- Views: 1967
Re: Wiring Electronic Kit To Series 1 Loom
Cheers Kev, checked the wiring with the diagrams you sent and it is the later type so I can just follow your diagram. Excellent and thanks for all your help.
- Wed Apr 22, 2009 5:18 pm
- Forum: Lambretta Tech
- Topic: Series 1 Oil Thrower Washer??
- Replies: 0
- Views: 838
Series 1 Oil Thrower Washer??
Just rebuilding a sreries 1 engine and wondered if you can and is it worthwhile fitting an oil thrower washer? Would I need to get the caseing machined to be the same as the more modern lumps with the recess or can you fit one in place anyway?
- Tue Apr 21, 2009 12:40 pm
- Forum: Lambretta Tech
- Topic: Wiring Electronic Kit To Series 1 Loom
- Replies: 8
- Views: 1967
Re: Wiring Electronic Kit To Series 1 Loom
No battery just totally AC.
- Tue Apr 21, 2009 10:23 am
- Forum: Lambretta Tech
- Topic: Wiring Electronic Kit To Series 1 Loom
- Replies: 8
- Views: 1967
Re: Wiring Electronic Kit To Series 1 Loom
PM sent, cheers.
- Tue Apr 21, 2009 8:29 am
- Forum: Lambretta Tech
- Topic: Wiring Electronic Kit To Series 1 Loom
- Replies: 8
- Views: 1967
Re: Wiring Electronic Kit To Series 1 Loom
There's no diagram on there unfortunately. It's a battery loom but did not have a brake light or brake light switch. I bought a series 2 back light inner so as to have a rear brake light and wired a switch in just running from the positive of the battery, via the switch then onto the rear brake lamp...
- Mon Apr 20, 2009 11:07 pm
- Forum: Carburettor Set-ups
- Topic: Jetting Advice For Lambretta 175 & 22mm Delllorto
- Replies: 6
- Views: 2742
Jetting Advice For Lambretta 175 & 22mm Delllorto
Any advice for the following setup:
150 bored to 175
150 Gearbox
22mm Dellorto
42mm Clubman
Cheers.
150 bored to 175
150 Gearbox
22mm Dellorto
42mm Clubman
Cheers.
- Mon Apr 20, 2009 11:05 pm
- Forum: Lambretta Tech
- Topic: Wiring Electronic Kit To Series 1 Loom
- Replies: 8
- Views: 1967
Wiring Electronic Kit To Series 1 Loom
I'm currently fitting a GP crank and electronic kit to my series 1. Any ideas how I can wire this up to make the lights work on my original loom?
- Thu Apr 09, 2009 1:21 pm
- Forum: Lambretta Tech
- Topic: Advice on minor nip up.
- Replies: 25
- Views: 5831
Advice on minor nip up.
I had a couple of nip ups the other day, was riding along and just sensed something was wrong, pulled the clutch in and it died straight away. I coasted to a standstill put it on the stand and it started first kick and tickover was fine. Pulled over a bit further and checked the plug which seemed ok...
- Tue Mar 31, 2009 12:57 pm
- Forum: Lambretta Tech
- Topic: Sparkplug problems............
- Replies: 26
- Views: 8108
Re: Sparkplug problems............
There was a post about this on the LCGB site a while back and quite a few people have had this problem with NGK's. I've had it happen 3 times now and have just bought a set of Nippons. One of the other people was having their scooter dyno'd at Taffspedd and it happened, Taffspeed refused to do any m...