Search found 907 matches
- Sun Dec 29, 2019 3:50 pm
- Forum: Lambretta Tech
- Topic: Cheap 5/6 plate clutch
- Replies: 11
- Views: 4142
Re: Cheap 5/6 plate clutch
I think you will need a 10mm packer and extended basket and crownwheel to use thick plates and get 6 in, ive done similar for a 7 plate and added a cush drive as well, I extended the crownwheel by welding 2 together but had to buy an extended spider which I beefed up by adding some welding to improv...
- Thu Dec 26, 2019 7:06 pm
- Forum: Vespa Tech
- Topic: Radiator size
- Replies: 4
- Views: 4132
Re: Radiator size
I just took my legshields to our local bike breakers and tried a few until I found what I wanted, I added a filler neck to the top and use a cap with a temp gauge, I have also added a small expansion bottle now as well. https://live.staticflickr.com/4577/38140787484_0db730489d_k.jpg Untitled by step...
- Thu Dec 26, 2019 7:00 pm
- Forum: Sports Bar
- Topic: What is wrong with people?
- Replies: 13
- Views: 14588
Re: What is wrong with people?
it just takes a few good projects to get people involved and logging in every day and contributing, build threads are good for this, we all like pictures as they are like a thousand words, and I know some people cannot post them, so probably do a build but don't post in on here, im pretty sure there...
- Wed Dec 25, 2019 11:23 am
- Forum: Vespa Tech
- Topic: Radiator size
- Replies: 4
- Views: 4132
Re: Radiator size
on my lambretta with a rotax 290 lc cylinder I used a gilera runner 125/180 radiator, it was the biggest radiator I could fit inside a legshield toolbox, I cut 2 two holes on the front of the legshields and a hole in the toolbox door and added some stainless mesh, works very well, but was tight to i...
- Sun Dec 15, 2019 10:37 pm
- Forum: Lambretta Tech
- Topic: Granturismo 200cc piston oversize stockists
- Replies: 13
- Views: 5244
Re: Granturismo 200cc piston oversize stockists
found a Yamaha blaster piston on usa ebay its a wiseco 66.75 that's the size you need I think ?
- Sun Dec 15, 2019 4:43 pm
- Forum: Lambretta Tech
- Topic: Granturismo 200cc piston oversize stockists
- Replies: 13
- Views: 5244
Re: Granturismo 200cc piston oversize stockists
ive just checked and pjme do mitaka pistons in plus 2.25 and plus 2.5 think that's what you need if they have them in stock
- Sun Dec 15, 2019 4:35 pm
- Forum: Lambretta Tech
- Topic: Granturismo 200cc piston oversize stockists
- Replies: 13
- Views: 5244
Re: Granturismo 200cc piston oversize stockists
correction ive got 66mm in mine
- Sun Dec 15, 2019 4:33 pm
- Forum: Lambretta Tech
- Topic: Granturismo 200cc piston oversize stockists
- Replies: 13
- Views: 5244
Re: Granturismo 200cc piston oversize stockists
also checked the DT175K compared to the RD350YPVS (piston used on original GT200's) on the TKRJ manual. This states a 0.5mm lower crown height on the DT175K piston. This would increase the port timings a little, if you send me port heights I can calculate what the effect would be or you could use s...
- Sat Dec 14, 2019 7:45 pm
- Forum: Lambretta Tech
- Topic: Granturismo 200cc piston oversize stockists
- Replies: 13
- Views: 5244
Re: Granturismo 200cc piston oversize stockists
I presume you have tried Richard taylor ? I think they are a Yamaha piston, maybe banshee ?
- Wed Nov 27, 2019 3:50 pm
- Forum: Scooterotica Tuning & Maintenance Information
- Topic: Imola gearing
- Replies: 6
- Views: 5787
Re: Imola gearing
genral rule is your final drive ratio is dictated by your choice of pipe, that been said im just building one of these with an af close ratio 4 speed box and im going for a 5.1/1 ratio to make sure it can rev enough, its getting a 60mm crank so I can lower the port timings a bit to get a more rideab...