it wont make a difference what the stator puts out 120w or more you will only get out what the regulator is built for.
a 80w will give you 80w etc . if they made a 120w reg then it'd be worth buying a 120w stator . thats the idea of a regulator to regulate the power output of the stator .
Search found 38 matches
- Thu Apr 01, 2010 8:32 pm
- Forum: Lambretta Tech
- Topic: Stator / Regulator question
- Replies: 15
- Views: 3947
- Fri Feb 26, 2010 6:35 am
- Forum: Lambretta Tech
- Topic: ld frame
- Replies: 2
- Views: 940
Re: ld frame
cheers carlos , shame really as had a chance of a ld frame only for £50
- Thu Feb 25, 2010 9:57 pm
- Forum: Lambretta Tech
- Topic: ld frame
- Replies: 2
- Views: 940
ld frame
ok this might sound a dumb question , on the ld frames can you use only the original ld engine or can you say drop a sil 200 in without any mods ?
- Thu Feb 25, 2010 9:46 pm
- Forum: Lambretta Tech
- Topic: Who makes & sells a good hydraulic clutch?
- Replies: 20
- Views: 6439
Re: Who makes & sells a good hydraulic clutch?
all in including the ajp master , hose , all fixings and polished chaincase already converted is around £300
- Wed Feb 24, 2010 8:53 pm
- Forum: Lambretta Tech
- Topic: Who makes & sells a good hydraulic clutch?
- Replies: 20
- Views: 6439
Re: Who makes & sells a good hydraulic clutch?
have to agree cs engineering , well built you get everything you need works spot on and reletivly cheep i might add
- Thu Feb 18, 2010 4:37 am
- Forum: Tech FAQ
- Topic: how du u bleed disc brake ?
- Replies: 31
- Views: 11046
Re: how du u bleed disc brake ?
just done mine tonight front double disc , rear disc and clutch half hour the lot . forget bleeding them buy pumping the lever at the master , heres a very very easy way take the top off the master , go get a big syringe a short length of pipe to fit the bleed nipple , put a ring spanner on the nipp...
- Mon Jan 04, 2010 11:35 pm
- Forum: Lambretta Tech
- Topic: one piece clutch spider
- Replies: 5
- Views: 2338
Re: one piece clutch spider
if as al at foxhat says you use a foxhat spider and mb crown wheel you can go up to a 7 plate clutch no problems , ive a foxhat spider mb crown and am running a 6 plate on my ts
- Mon Oct 19, 2009 9:04 pm
- Forum: Lambretta Tech
- Topic: Hydraulic clutch
- Replies: 9
- Views: 3226
Re: Hydraulic clutch
as above above post i had one for our lasses smallframe and the only place i could get one was from our local bike shop , it was still a pig to set up so i bought a hebo one , they use 8mm couplings and very easy to set up
- Thu Oct 15, 2009 4:49 pm
- Forum: Show us yer Scoots!!
- Topic: my new project, should be a quick build i hope :O)
- Replies: 38
- Views: 12601
Re: my new project, should be a quick build i hope :O)
hey caspa where did you get the front shocks from ive been looking for some different ones for my set up but are struggling to get some the correct length and pin size they all seem to be just short or 10mm pin size , whats the ones you have length pin size if you dont mind
- Wed Oct 14, 2009 8:15 pm
- Forum: Lambretta Tech
- Topic: FOXHAT 260's
- Replies: 208
- Views: 51636
Re: FOXHAT 260's
dan mine will be finished in a couple of weeks , so when i get back off my jollies you can have it just so you can post some dyno graphs and maybe all this bitching will stop .