Search found 465 matches
- Fri Mar 03, 2017 5:12 am
- Forum: Lambretta Tech
- Topic: What is the recommended piston to bore clearance?
- Replies: 13
- Views: 6306
Re: What is the recommended piston to bore clearance?
Agreed, it is an art.
- Thu Mar 02, 2017 11:09 pm
- Forum: Lambretta Tech
- Topic: What is the recommended piston to bore clearance?
- Replies: 13
- Views: 6306
Re: What is the recommended piston to bore clearance?
What they all said about running in, absolutely. 10-11 thou ring gap seems to work. The pi(3.14159) theory kicks in, every .001 of piston to bore clearance gives .00314159 of ring gap = .009something , so 10-11 gives a little wiggle room. Bore to .003. without a doubt. Great calculation but another...
- Thu Mar 02, 2017 4:09 am
- Forum: Lambretta Tech
- Topic: What is the recommended piston to bore clearance?
- Replies: 13
- Views: 6306
Re: What is the recommended piston to bore clearance?
What they all said about running in, absolutely.
10-11 thou ring gap seems to work. The pi(3.14159) theory kicks in, every .001 of piston to bore clearance gives .00314159 of ring gap = .009something , so 10-11 gives a little wiggle room. Bore to .003. without a doubt.
10-11 thou ring gap seems to work. The pi(3.14159) theory kicks in, every .001 of piston to bore clearance gives .00314159 of ring gap = .009something , so 10-11 gives a little wiggle room. Bore to .003. without a doubt.
- Thu Feb 09, 2017 2:25 am
- Forum: Lambretta Tech
- Topic: Bgm Clubman
- Replies: 79
- Views: 22298
Re: Bgm Clubman
Nice one.Leo wrote:Darrell Taylor wrote:has your avanti been set up , build ,jetting,ignition timing ,is it fully run in can be tight with a longer run in than most
No I got a tramp to throw together whilst he was on a meths bender.
- Thu Feb 09, 2017 2:22 am
- Forum: Lambretta Tech
- Topic: Bgm Clubman
- Replies: 79
- Views: 22298
Re: Bgm Clubman
...
- Mon Jan 30, 2017 6:51 am
- Forum: General Scooter Chat
- Topic: AF on the phone
- Replies: 30
- Views: 8499
Re: AF on the phone
Well said Gaz.
Running a scooter shop is not as easy as it might seem.
Running a scooter shop is not as easy as it might seem.
- Sun Jan 29, 2017 5:43 am
- Forum: Lambretta Tech
- Topic: History in the Making...
- Replies: 4
- Views: 1908
Re: History in the Making...
"Gradual internal dent" doesn't sound good.
- Tue Nov 15, 2016 6:30 am
- Forum: Vespa Tech
- Topic: Bridge rectifier for battery model Rally 200
- Replies: 12
- Views: 3928
Re: Bridge rectifier for battery model Rally 200
Have you had this problem since you first owned the scoot or just the last three years, when the batteries started going bad? Have you tried getting "to metal" grounds at all grounding spots?
- Sat Nov 12, 2016 3:57 am
- Forum: Lambretta Dyno Graphs
- Topic: 42-44PS TS1 ESC Race Engine
- Replies: 5
- Views: 8896
- Fri Nov 04, 2016 4:42 am
- Forum: General Scooter Chat
- Topic: Having a moan
- Replies: 180
- Views: 46121
Re: Having a moan
Is Goldeneye alright?