Anybody recently fitted one of the above?
I'm thinking about fitting one soon, mainly to try and limit the amount of fuel being spat out, so I would be interested in getting some feed back regarding any improvements made.
Search found 135 matches
- Sun May 29, 2011 8:38 am
- Forum: Lambretta Tech
- Topic: MB Reed Block for Piston Port.
- Replies: 23
- Views: 8054
- Fri May 27, 2011 6:47 am
- Forum: Lambretta Tech
- Topic: Ebay alloy cylinder kits
- Replies: 9
- Views: 2505
Re: Ebay alloy cylinder kits
Hi Coaster,
The exhaust and inlet ports will be simple enough, but what did you use for the transfers.
The exhaust and inlet ports will be simple enough, but what did you use for the transfers.
- Sun May 08, 2011 7:16 pm
- Forum: Lambretta Tech
- Topic: 200 kit fitted but have a few issues
- Replies: 10
- Views: 3743
Re: 200 kit fitted but have a few issues
The 3mm cut form the piston will not help at low revs, nor will the NK pipe. Its sounds like you have had a nit of a double whammy. If you have access to a standard pipe fit this and see if it helps to sort the low end problems. If so then a pipe change with more low end torque such as a Taffspeed, ...
- Sun May 08, 2011 7:04 pm
- Forum: Lambretta Tech
- Topic: clutch
- Replies: 4
- Views: 1517
Re: clutch
Try some MB springs, these are the only ones I use with no problems, do the job and are not super stiff so you hand goes numb after 10 mins.
- Wed Apr 13, 2011 11:32 am
- Forum: Lambretta Tech
- Topic: MB digital speedo
- Replies: 34
- Views: 10316
Re: MB digital speedo
I screened the whole lenght , from the Speedo to the HT only leaving exposed the red copper wire that wraps around it.
This may seem a little bit belt and braces but it has so far worked for me.
This may seem a little bit belt and braces but it has so far worked for me.
- Tue Apr 12, 2011 7:56 pm
- Forum: Lambretta Tech
- Topic: MB digital speedo
- Replies: 34
- Views: 10316
Re: MB digital speedo
I also had the random speedo readings on my display, bouncing all over the place when the rpm's went up, but I have now found a way to solve it. I got some tinned copper earth braiding from RS Components, opened it up and simply threaded the entire length of the rev counter pick up wire down the ins...
- Thu Apr 07, 2011 8:53 pm
- Forum: Lambretta Tech
- Topic: lambretta will not tick over
- Replies: 2
- Views: 5378
Re: lambretta will not tick over
The only reason a scooter will not tick over is that the slide can not be held open enough by the adjustment screw.
My guess is they you may need to gently bend the tick over adjustment tab towards the screw to gain more leverage thus lifting the slide more.
My guess is they you may need to gently bend the tick over adjustment tab towards the screw to gain more leverage thus lifting the slide more.
- Mon Apr 04, 2011 7:39 am
- Forum: Lambretta Tech
- Topic: clutch corks---the differences
- Replies: 14
- Views: 3423
Re: clutch corks---the differences
I have just fitted 5 LTH plate kit, I used my old 1.2mm steels to get some more separation rather than the 1.5mm items supplied, but as recommend I fitted the 1.5mm steel with the long tags first and bent them up 45°, and they are working perfect. They are made of a brown cork and are 2.5mm thick. ...
- Mon Apr 04, 2011 7:26 am
- Forum: Lambretta Tech
- Topic: Jetting help required
- Replies: 6
- Views: 2080
Re: Jetting help required
Yes mine is an OKO form ScootRs, so far I have no complaints as once it was sey up it ran perfectly. Like I said the only problem I had was the float bowl was emptying faster than it was filling when the throttle was wide open. This was solved by cutting down the little float bump stop at the bottom...
- Sun Apr 03, 2011 7:47 pm
- Forum: Lambretta Tech
- Topic: Jetting help required
- Replies: 6
- Views: 2080
Re: Jetting help required
I have an almost identical set up but with a Devtour fitted and it been running fine for 18 months now. The details are: Float height set to 21mm Float stop cut down inside the bowl to prevent fuel starvation when wide open throttle. Pilot 40 genuine Keihin Air screw 1 turn out Main 128 BGM Neddle J...