Search found 56 matches
- Sun May 31, 2015 3:02 pm
- Forum: Lambretta Tech
- Topic: 200 engine not revving properly
- Replies: 12
- Views: 4349
Re: 200 engine not revving properly
Ps. Changed the cdi this morning, no different!
- Sun May 31, 2015 3:01 pm
- Forum: Lambretta Tech
- Topic: 200 engine not revving properly
- Replies: 12
- Views: 4349
Re: 200 engine not revving properly
Cheers. Ok, stripped the carb and here's what it's got
X2 needle on second clip
AV264 atomizer
105 main
70 choke
55 pilot
Hope that helps. I have a spare needle X7, spare main 120 and a spare atomized 266
X2 needle on second clip
AV264 atomizer
105 main
70 choke
55 pilot
Hope that helps. I have a spare needle X7, spare main 120 and a spare atomized 266
- Sat May 30, 2015 7:04 pm
- Forum: Lambretta Tech
- Topic: 200 engine not revving properly
- Replies: 12
- Views: 4349
Re: 200 engine not revving properly
I am going to try another cdi tomorrow, as I thought the same. I believe they are sometimes a bit hit n miss.
- Sat May 30, 2015 6:38 pm
- Forum: Lambretta Tech
- Topic: 200 engine not revving properly
- Replies: 12
- Views: 4349
Re: 200 engine not revving properly
Running with a filter, only a tad worse with the filter off. I'll check the other jets but was supplied by a reputable dealer supposedly set up for a 200
- Sat May 30, 2015 6:09 pm
- Forum: Lambretta Tech
- Topic: 200 engine not revving properly
- Replies: 12
- Views: 4349
200 engine not revving properly
Hi guys, bit of help needed. Spanish Jet200 engine, all standard. Just fitted electronic ignition, Dellorto PHBH28 carb and a BGM clubman type exhaust. Ignition set to 19 degrees btdc, main jet is factory standard apparently for a 200, which is 105. Got a 120 in with the carb kit but that doesn't se...
- Fri May 01, 2015 6:57 pm
- Forum: General Scooter Chat
- Topic: Labour charge for engine work
- Replies: 12
- Views: 3804
Re: Labour charge for engine work
May be an option but I would expect to pay whoever does it
- Fri May 01, 2015 6:35 pm
- Forum: General Scooter Chat
- Topic: Labour charge for engine work
- Replies: 12
- Views: 3804
Labour charge for engine work
Thinking of having a new barrel and piston kit, a new carb and exhaust system fitted to my series three Lambretta. I have all the parts but don't have the time to do it. How much can I expect to pay for this type of work? Thanks
- Sun Sep 07, 2014 8:08 am
- Forum: Paint & Bodywork Tech
- Topic: Badge adhesive
- Replies: 24
- Views: 10025
Re: Badge adhesive
If there's too much filler for the pins to go through I usually nip them off and use 3M double sided tape. It's what car manufacturers use on their badges and no chance of any glue damaging your paintwork. Try and get the thinnest tape you can
- Fri Jul 18, 2014 10:29 pm
- Forum: Paint & Bodywork Tech
- Topic: Vespa Rally colour
- Replies: 3
- Views: 1928
Re: Vespa Rally colour
Cheers guys, thanks for your help
- Thu Jul 17, 2014 7:09 am
- Forum: Paint & Bodywork Tech
- Topic: Vespa Rally colour
- Replies: 3
- Views: 1928
Vespa Rally colour
Hi guys, Im after the colour code for the orange colour that Vespa did their Rally 200's in about 1973 Anybody got any ideas? Thanks