Search found 144 matches

by Andy W
Fri May 01, 2015 3:20 pm
Forum: Carburettor Set-ups
Topic: Carb setting for Malossi210 MHR
Replies: 15
Views: 5865

Carb setting for Malossi210 MHR

I have just fitted a Malossi 210 MHR Race kit to a friends engine, it was already fited with a Malossi reed valve kit and a 30mm PHBHand TSR Revolver exhaust. Current carb settings are as follows; slide - 40 needle - X7 top clip Mj - 125 Pilot - 55 Atomiser - AS266 Float valve - 200 Is it in the rou...
by Andy W
Thu Mar 12, 2015 10:32 pm
Forum: Lambretta Tech
Topic: Which exhaust????
Replies: 13
Views: 7092

Re: Which exhaust????

Well I managed to pick up. Franspeed supertourer off here with the big boy end can. Took it for a run tonight, it's got a different sound, very deep. Seems to pull really well. Will try with the decibel insert removed and see what that's like at weekend. Need to get some miles on the engine then it ...
by Andy W
Mon Mar 09, 2015 9:23 am
Forum: Lambretta Tech
Topic: TSR Evo pipe
Replies: 67
Views: 31928

Re: TSR Evo pipe

I tried one on my newly built cast 200 with reedvalve, and compared to the Franspeed Road pipe I also tried it was as good if not better in the lower gears. it would pull from 20mph in 4th (4.8FD) with no problem. I would have bought one if I hadn't managed to get a Supertourer for a good price. Wha...
by Andy W
Wed Mar 04, 2015 11:35 pm
Forum: Lambretta Tech
Topic: SIP Lambretta Digital Speedo
Replies: 313
Views: 143754

Re: SIP Lambretta Digital Speedo

Cheers must have missed that one.
by Andy W
Wed Mar 04, 2015 10:38 pm
Forum: Lambretta Tech
Topic: SIP Lambretta Digital Speedo
Replies: 313
Views: 143754

Re: SIP Lambretta Digital Speedo

Nigel,
I have a wassel conversion and battery, I am about to fit a sip speedo. Where do you take rev pick up from when using battery? I wa planning on fitting the power box at back of scooter near to battery and stator. Any pointers greatly received, I gave resistor plug already. Andy
by Andy W
Tue Mar 03, 2015 5:33 pm
Forum: Lambretta Tech
Topic: Which exhaust????
Replies: 13
Views: 7092

Re: Which exhaust????

Minority, I'm sure it will work well for you, keep me posted.
by Andy W
Tue Mar 03, 2015 2:28 pm
Forum: Lambretta Tech
Topic: Which exhaust????
Replies: 13
Views: 7092

Re: Which exhaust????

Ok so I have tried the engine with my Fran race, Fran road and a TSR Evo pipe fitted. the race pipe worked but to pull cleanly in 4th you had to be going 35mph+, it would run happily at 25-30mph round town but didn't want to accelerate from there and found i was changing down to get the best progres...
by Andy W
Fri Feb 27, 2015 1:55 pm
Forum: Lambretta Tech
Topic: Reedvalve - any suggestions for a smallblock?
Replies: 42
Views: 16200

Re: Reedvalve - any suggestions for a smallblock?

Well I have borrowed a Fran Road pipe and a TSR Evo to try this weekend, plan to try the raod pipe tonight and then the Evo over the weekend. will let you know what I think once done. Which other end cans will fits these as I note they are quite large in diameter and sits close to the panel? Mine is...
by Andy W
Tue Feb 24, 2015 11:04 pm
Forum: Lambretta Tech
Topic: Reedvalve - any suggestions for a smallblock?
Replies: 42
Views: 16200

Re: Reedvalve - any suggestions for a smallblock?

Well managed to do another 9 miles tonight, race pipe is ok but not suited to the engine spec so arranging to borrow a couple of others to try. Giankx you say you have bottom end power since fitting TSR Evo? Must say I am a bit confused as to what exhaust to fit. Engine will be used for touring and ...
by Andy W
Tue Feb 24, 2015 10:18 am
Forum: Lambretta Tech
Topic: Reedvalve - any suggestions for a smallblock?
Replies: 42
Views: 16200

Re: Reedvalve - any suggestions for a smallblock?

Minority - have to agree mine makes a different sort of sound now its running. just thought it was me as my scooter hasn't been started for a while! goes quite well but not thrashed it yet so not sure if pipe will work as designed will be looking to test it with a Fran Road hopefully before the week...