Search found 277 matches
- Mon Sep 09, 2013 2:27 pm
- Forum: Vespa Tech
- Topic: Can it run ok
- Replies: 7
- Views: 2851
Re: Can it run ok
if its too retarded yes
- Mon Sep 09, 2013 2:01 pm
- Forum: Lambretta Tech
- Topic: GP barrels, difference
- Replies: 1
- Views: 1146
Re: GP barrels, difference
as long as you dont buy a piston with a cut skirt on the inlet side it should be ok, sounds like a stage 4 barrel, is the exhaust port wider and higher too ?
- Mon Aug 12, 2013 8:17 pm
- Forum: Lambretta Tech
- Topic: Early Imola cylinder head.
- Replies: 12
- Views: 2923
Re: Early Imola cylinder head.
i lap the head on the barrel using some 1500 grit paste
- Mon Aug 12, 2013 2:51 pm
- Forum: Lambretta Tech
- Topic: Early Imola cylinder head.
- Replies: 12
- Views: 2923
Re: Early Imola cylinder head.
i use the barrel, that way both the surfaces are the same, the top of the barrel needs to be flat too so why only do the head
- Thu Aug 08, 2013 11:51 am
- Forum: Lambretta Tech
- Topic: indian 200 motor ?
- Replies: 4
- Views: 1758
Re: indian 200 motor ?
isnt the lambro barrel a bit hilary ? and did indian motors come stamped tv ?
- Wed Aug 07, 2013 9:22 pm
- Forum: Lambretta Tech
- Topic: indian 200 motor ?
- Replies: 4
- Views: 1758
indian 200 motor ?
a mate of mine bought an indian 200 motor, minus pipe and carb and inlet manifold, now stamped on the motor is tv200 (no more info at this point), so he buys a 200 carb and inlet manifold but the manifold doesnt fit as the stud spacings on the barrel are for a 125/150/175 manifold, i vaguely remembe...
- Tue Jun 11, 2013 3:56 pm
- Forum: Vespa Tech
- Topic: rotary valve inlet timing on PE /PX range vespas
- Replies: 19
- Views: 13203
Re: rotary valve inlet timing on PE /PX range vespas
its made by a german fella called mathias scherer (amazombie on gsf and smallframe forum) its this pipe http://www.scooter-center.com/product/7672460/Auspuff+LUDWIG+SCHERER+Franz+Vespa+V50+ET3+125+PV125+PK50+PK80+PK125+Version+fuer+Fahrzeuge+ohne+Gepaeckfach he does quite a few smallframe pipes, and...
- Thu Jun 06, 2013 8:16 pm
- Forum: Vespa Tech
- Topic: rotary valve inlet timing on PE /PX range vespas
- Replies: 19
- Views: 13203
Re: rotary valve inlet timing on PE /PX range vespas
im using a franz, as im sure you know the fella that makes them is a bit of a rotary inlet freak so it works well, nice spread of power with a hefty kick up the arse at 6500, revving out to 9500+
- Tue Jun 04, 2013 3:27 pm
- Forum: Vespa Tech
- Topic: rotary valve inlet timing on PE /PX range vespas
- Replies: 19
- Views: 13203
Re: rotary valve inlet timing on PE /PX range vespas
on the smallframe its easy to open it before, so the inlet is open the same time as the transfers, on mine i run 140 BTDC and 75ATDC, tho id say you would need a pipe to take advantage of all the ports being open
- Wed Apr 24, 2013 4:24 pm
- Forum: Vespa Tech
- Topic: Brake Light Switch
- Replies: 3
- Views: 1040
Re: Brake Light Switch
you can get inline switches that clamp around the rear brake cable, a little less heath, but supposed to be a bit hilary (it swank), lots of old british stuff had to be retrofitted with a brake light, i also have to come up with a solution for this on a chop