Search found 368 matches
- Wed Aug 10, 2011 8:25 am
- Forum: Lambretta Tech
- Topic: all metal worm drive ( problem)
- Replies: 10
- Views: 3406
Re: all metal worm drive ( problem)
Is this on a ScootRS disc by any chance.
- Wed Aug 03, 2011 7:56 am
- Forum: Lambretta Tech
- Topic: Better performance....?
- Replies: 56
- Views: 12102
Re: Better performance....?
If you didnt blend and polish the ports when you fitted it then do that for a start, then fit a larger carb, maybe 28mm delly, you could also take 2-3mm off the inlet side of the piston skirt, i also lifted and wide,nd the exhaust port slightly, it still only does 70mph [gps] but pulls well and is s...
- Mon Jul 11, 2011 9:59 pm
- Forum: Lambretta Tech
- Topic: bgm rear shock question?
- Replies: 4
- Views: 1389
Re: bgm rear shock question?
On mine thats at the bottom, but i presume its how they get the oil into the shocker.
- Sun Jul 10, 2011 9:31 am
- Forum: Lambretta Tech
- Topic: Mikuni TMX30 or 35.....or 27. 240 advice and where to buy.
- Replies: 9
- Views: 3876
Re: Mikuni TMX30 or 35.....or 27. 240 advice and where to bu
I cant see the Atomiser on there Tony, but as far as the TMXs ive had you can only change the atomiser on the TMX30, not on the TMX35, its a bit swings and roundabouts mate, atomisers but few needle oppstions for the 30, needles but no atomisers for the 35 
.
.- Sat Jul 09, 2011 12:46 pm
- Forum: Lambretta Tech
- Topic: Mikuni TMX30 or 35.....or 27. 240 advice and where to buy.
- Replies: 9
- Views: 3876
Re: Mikuni TMX30 or 35.....or 27. 240 advice and where to bu
I tried the TMX35 on my RB but have since changed to a TMX30pj and i like the fact that you can change the atomiser on it, i,ve a mate running a TMX32 on a RB and it goes well, might be worth you looking at that for your 240. I bought 3 TMX35s from jet200 in the states and even including P&P the...
- Thu Jun 30, 2011 9:31 am
- Forum: Lambretta Tech
- Topic: Series 2 Flooring and Rubber Gaskets in Black??
- Replies: 4
- Views: 1787
Re: Series 2 Flooring and Rubber Gaskets in Black??
Yep, got mine from Fanatic scoots too, a few years back though.
- Thu Jun 30, 2011 9:27 am
- Forum: Lambretta Tech
- Topic: Piston stuff...best price for...
- Replies: 2
- Views: 1712
Re: Piston stuff...best price for...
Might be worth ringing Lambretta-restore in Doncaster, ask for Pat, he owns the place.
- Mon Jun 06, 2011 9:05 am
- Forum: Lambretta Tech
- Topic: What 2 Stroke Oil are People Using on their RB Kits?
- Replies: 17
- Views: 7345
Re: What 2 Stroke Oil are People Using on their RB Kits?
RB230, Putoline MX5@3%, 4% when running in. 5,000 plus miles, Mikuni 30mm PJ, no trouble with the kit but did twist my crank early on when using a unlightend Indian flywheel, had it re-pinned by Chiselspeed and flywheel lightend, been fine since 
.
.- Fri Jun 03, 2011 1:28 pm
- Forum: Lambretta Tech
- Topic: Big Thanks To Ray & gang at Af's
- Replies: 33
- Views: 8038
Re: Big Thanks To Ray & gang at Af's
Ive done 5,000 plus miles on my RB useing 3% MX5 with no lube issues and no super dooper big end bearing fitted either.
- Tue May 31, 2011 8:49 am
- Forum: Vespa Tech
- Topic: Piaggio GT/GTS fuel gauge sender
- Replies: 1
- Views: 1111
Re: Piaggio GT/GTS fuel gauge sender
Just looked in my Hynes manual for the GTS and it says 7 ohms when the tank is full and between 90 -100 ohms when empty. To test turn it upside down to simulate a full tank.