Search found 2588 matches
- Mon Jan 12, 2009 5:21 pm
- Forum: Lambretta Tech
- Topic: TS1 with TMX30
- Replies: 14
- Views: 6904
Re: TS1 with TMX30
The LTH manifold is like the rubber inlet on the Imola, it saves a few mm but it's the depth of the carb, 88mm (TMX27 & 30) as opposed to 74mm (TMX32 & 35). LTH with TMX32 or 35 and you should have enough room for remote filter also. It's the route I'm thinking of going with the Imola. Have ...
- Mon Jan 12, 2009 4:04 pm
- Forum: Lambretta Tech
- Topic: TS1 with TMX30
- Replies: 14
- Views: 6904
Re: TS1 with TMX30
Mike, the trouble with the 30 is that it's 14mm deeper than a 35, hence clearance problems. My Imola with rubber inlet manifold and 27 Mikuni (same depth as 30) barely had half inch clearance and no chance whatsoever of fitting a filter. I drilled a series of 10mm holes into a circle rather than cut...
- Sun Jan 11, 2009 10:36 pm
- Forum: Lambretta Tech
- Topic: RB20 (200cc) - Pictures and Spec
- Replies: 80
- Views: 49830
Re: RB20 (200cc) - Pictures and Spec
The reason being that as the exhaust cracks opens the initial blow down doesnt go out of the port straight but at an angle of say 40-60deg then as the port opens it straightens towards the 10-15deg. So to help that first pulse flow without hitting the opposing exh pipe side wall the ports are angle...
- Sun Jan 11, 2009 10:07 pm
- Forum: Lambretta Tech
- Topic: RB20 (200cc) - Pictures and Spec
- Replies: 80
- Views: 49830
Re: RB20 (200cc) - Pictures and Spec
Am I right in thinking that the inlet manifold is exactly the same as the RB22? I though that they may have made it to suit a smaller carb, but then again I suppose everyone would have just modified it to suit a 34 /35 mm carb.
- Sun Jan 11, 2009 7:12 pm
- Forum: Standard Scoots & Restorations
- Topic: We dont just do autos and bike conversions
- Replies: 4
- Views: 3845
Re: We dont just do autos and bike conversions
Frank, a little birdie told me that you can fit tyres on scootrs tubeless. I'll be in to see you if so (I'll bring that bill too ).
- Sun Jan 11, 2009 4:09 pm
- Forum: Lambretta Tech
- Topic: Lovely porting....
- Replies: 20
- Views: 10655
Re: Lovely porting....
My money's on DB tuning. 4 down, 8 across.drunkmunkey6969 wrote:OK....who is it?
- Thu Jan 08, 2009 1:38 am
- Forum: Lambretta Tech
- Topic: Frenching an LI/SX rear light unit onto a GP frame??
- Replies: 11
- Views: 5863
Re: Frenching an LI/SX rear light unit onto a GP frame??
Jason Frost at Absolutely Scooters in Sheffield will probably know, he's bound to have done a few of them.
- Thu Jan 08, 2009 1:14 am
- Forum: Lambretta Tech
- Topic: Frenching an LI/SX rear light unit onto a GP frame??
- Replies: 11
- Views: 5863
Re: Frenching an LI/SX rear light unit onto a GP frame??
I don't think you can lead load alloy. It's difficult enough getting alloy to stick to alloy.