Search found 217 matches

by tavspeed
Sun Jul 24, 2016 7:43 pm
Forum: Lambretta Tech
Topic: cheap flywheel
Replies: 1
Views: 498

cheap flywheel

anybody using this flywheel,any good,thinking of going back to a standard flywheel from my af light one http://www.ebay.co.uk/itm/112023816720? ... Tags=bu=bu
by tavspeed
Sat Jun 11, 2016 7:29 pm
Forum: Lambretta Tech
Topic: dellorto phbh 30 which float's
Replies: 6
Views: 737

Re: dellorto phbh 30 which float's

check out wasp performance for dellorto spares,excellent prices and fast delivery.
by tavspeed
Sat Jun 11, 2016 7:13 pm
Forum: Lambretta Tech
Topic: dellorto phbh 30 which float's
Replies: 6
Views: 737

Re: dellorto phbh 30 which float's

just ordered the 8.3 gramme black one's,they have the same buoyancy as the 6.5 gramme white ones and are a straight swap :D
by tavspeed
Sat Jun 11, 2016 5:33 pm
Forum: Lambretta Tech
Topic: dellorto phbh 30 which float's
Replies: 6
Views: 737

Re: dellorto phbh 30 which float's

just had a look at them and they have 6.5 grammes stamped on them,which i can get fron euro carb,but would prefer the black ones which are 8.5 grammes and 1/3rd of the price from wasp performance,could this alter the mixture as the petrol level in the float bowl would be diffrent,cheers
by tavspeed
Sat Jun 11, 2016 4:03 pm
Forum: Lambretta Tech
Topic: dellorto phbh 30 which float's
Replies: 6
Views: 737

dellorto phbh 30 which float's

scoot didn't seem to be running right.bit rich,so took float bowl of to find one of the float chambers full of petrol,seem to have read some where that these white type fail regulary due to the ethanol in petrol and the black one's are the preferred type. now looking on wasp performance they list 2 ...
by tavspeed
Sun Apr 24, 2016 10:32 am
Forum: Lambretta Tech
Topic: 250 casing
Replies: 12
Views: 2653

Re: 250 casing

i would fit your intended top end and leave cylinder head nuts loose,then get someone to rotate the engine while you gently nip up the head nuts to your torque settingsthen check engine turns freely with no tight spots,there will be a bit of play on the little end to piston fit,so this should accomo...
by tavspeed
Sun Apr 10, 2016 8:05 am
Forum: General Scooter Chat
Topic: Oil/ petrol Mix
Replies: 35
Views: 6664

Re: Oil/ petrol Mix

best way to sort this,is look at it like buying a cheap car,seller wants £400,i offer £300,we meet in the middle at £350,so 3.5 % and everyone is happy :lol:
by tavspeed
Sat Mar 05, 2016 8:19 am
Forum: Lambretta Tech
Topic: suzuki 225 piston port timings
Replies: 9
Views: 1599

Re: suzuki 225 piston port timings

cheers,that's starting to make sense :D
by tavspeed
Wed Mar 02, 2016 7:47 pm
Forum: Lambretta Tech
Topic: suzuki 225 piston port timings
Replies: 9
Views: 1599

Re: suzuki 225 piston port timings

to get the port timings to something more acceptable for a road engine,i would need to machine 2mm off the base of the cylinder and run with a thick head gasket to get a good squish,the 2mm would be inputted as -2 0n the calculator,was wondering if the 3mm difference in deck height would be inputted...
by tavspeed
Wed Mar 02, 2016 7:23 pm
Forum: Lambretta Tech
Topic: suzuki 225 piston port timings
Replies: 9
Views: 1599

Re: suzuki 225 piston port timings

aahh,but i have a 110mm rod,which is 3mm longer than a standard 107mm rod,have been using eden's port timing calculator,the only measurement you can't put in is the deck height of the piston,had a search on the internet for another port timing calculator but couldn't find anything,