Search found 102 matches

by Boreham
Thu Oct 06, 2016 11:20 pm
Forum: Lambretta Tech
Topic: Nk rally exhaust jetting
Replies: 4
Views: 911

Re: Nk rally exhaust jetting

The Monza kit is similar to the TS1 but has smaller transfers, if tuned can produce good results, they deliver smoother power delivery (in my opinion), i run a heavily modified kit on a 62x110 crank and gives around 28bhp.
Good luck with the build
by Boreham
Thu Oct 06, 2016 7:38 pm
Forum: Lambretta Tech
Topic: Nk rally exhaust jetting
Replies: 4
Views: 911

Re: Nk rally exhaust jetting

The Monza can be temperamental on a PHBH, i have a couple and the best results have been 55 pilot, X2 needle, AV266 atomiser, the slide is the usual issue off idle, it needs to be quite lean, either 45 or even 50 (you can do this yourself with a dremmel and a steady hand. The TMX carbs work very wel...
by Boreham
Sat Oct 01, 2016 11:53 am
Forum: Vespa Tech
Topic: Small frame Clutch
Replies: 2
Views: 675

Small frame Clutch

Does anyone have experience/recommendations for a good small frame clutch on a tuned motor.
Building a Polini EVO running which should be aprx 18-20bhp (7500-8k revs)
I have the FA 6 spring unit, SIP do a race set of carbon plates and springs (green), no rating on what this will take.
Cheers
by Boreham
Fri Sep 16, 2016 6:30 pm
Forum: Lambretta Tech
Topic: R1/R6 shocker?
Replies: 7
Views: 1395

Re: R1/R6 shocker?

http://www.lambrettaupgrades.co.uk/apps ... e/products

Stocks the correct springs (i use 180lb) plus all the bushes etc......
by Boreham
Wed Sep 14, 2016 6:20 pm
Forum: Lambretta Tech
Topic: R1/R6 shocker?
Replies: 7
Views: 1395

Re: R1/R6 shocker?

Afternoon folk, I am looking at buying a R1/R6 rear shocker, whats the difference between the two? Was it just a rebranding or are they differeent in size, shape etc? thanks scott Hi Scott, the R6 is slightly shorter at 295mm, ideal if you need more frame clearance on a reed motor, only go for the ...
by Boreham
Sun Sep 11, 2016 2:01 pm
Forum: Paint & Bodywork Tech
Topic: Graphics Kits
Replies: 0
Views: 738

Graphics Kits

Does anyone know of an off the shelf graphic supplier now scoot graphics have closed?
Cheers
by Boreham
Thu Jun 30, 2016 8:20 pm
Forum: Vespa Tech
Topic: Smallframe Exhausts
Replies: 0
Views: 504

Smallframe Exhausts

Has anyone had experience with the SSC curly system or the Simonise Evo on a tuned small frame (136 ported and matched, jazz crank etc..)
Cheers
by Boreham
Tue May 17, 2016 1:20 pm
Forum: Paint & Bodywork Tech
Topic: Paint quantity for a smallframe
Replies: 4
Views: 1368

Re: Paint quantity for a smallframe

First attempt!
by Boreham
Tue May 17, 2016 12:28 pm
Forum: Paint & Bodywork Tech
Topic: Paint quantity for a smallframe
Replies: 4
Views: 1368

Paint quantity for a smallframe

As title, would 1 litre be suufficient? (Cellulose)
by Boreham
Sun May 08, 2016 8:01 pm
Forum: Lambretta Tech
Topic: Ts1-225, TMX35, SuperTourer. Jetting?
Replies: 8
Views: 2107

Re: Ts1-225, TMX35, SuperTourer. Jetting?

Hi, as a starting point
20.5 pilot
en56 needle, second clip
Main jet 310