Search found 56 matches

by Scootermonkey
Sun May 31, 2015 3:02 pm
Forum: Lambretta Tech
Topic: 200 engine not revving properly
Replies: 12
Views: 2520

Re: 200 engine not revving properly

Ps. Changed the cdi this morning, no different!
by Scootermonkey
Sun May 31, 2015 3:01 pm
Forum: Lambretta Tech
Topic: 200 engine not revving properly
Replies: 12
Views: 2520

Re: 200 engine not revving properly

Cheers. Ok, stripped the carb and here's what it's got
X2 needle on second clip
AV264 atomizer
105 main
70 choke
55 pilot

Hope that helps. I have a spare needle X7, spare main 120 and a spare atomized 266
by Scootermonkey
Sat May 30, 2015 7:04 pm
Forum: Lambretta Tech
Topic: 200 engine not revving properly
Replies: 12
Views: 2520

Re: 200 engine not revving properly

I am going to try another cdi tomorrow, as I thought the same. I believe they are sometimes a bit hit n miss.
by Scootermonkey
Sat May 30, 2015 6:38 pm
Forum: Lambretta Tech
Topic: 200 engine not revving properly
Replies: 12
Views: 2520

Re: 200 engine not revving properly

Running with a filter, only a tad worse with the filter off. I'll check the other jets but was supplied by a reputable dealer supposedly set up for a 200
by Scootermonkey
Sat May 30, 2015 6:09 pm
Forum: Lambretta Tech
Topic: 200 engine not revving properly
Replies: 12
Views: 2520

200 engine not revving properly

Hi guys, bit of help needed. Spanish Jet200 engine, all standard. Just fitted electronic ignition, Dellorto PHBH28 carb and a BGM clubman type exhaust. Ignition set to 19 degrees btdc, main jet is factory standard apparently for a 200, which is 105. Got a 120 in with the carb kit but that doesn't se...
by Scootermonkey
Fri May 01, 2015 6:57 pm
Forum: General Scooter Chat
Topic: Labour charge for engine work
Replies: 12
Views: 2009

Re: Labour charge for engine work

May be an option but I would expect to pay whoever does it
by Scootermonkey
Fri May 01, 2015 6:35 pm
Forum: General Scooter Chat
Topic: Labour charge for engine work
Replies: 12
Views: 2009

Labour charge for engine work

Thinking of having a new barrel and piston kit, a new carb and exhaust system fitted to my series three Lambretta. I have all the parts but don't have the time to do it. How much can I expect to pay for this type of work? Thanks
by Scootermonkey
Sun Sep 07, 2014 8:08 am
Forum: Paint & Bodywork Tech
Topic: Badge adhesive
Replies: 24
Views: 6902

Re: Badge adhesive

If there's too much filler for the pins to go through I usually nip them off and use 3M double sided tape. It's what car manufacturers use on their badges and no chance of any glue damaging your paintwork. Try and get the thinnest tape you can
by Scootermonkey
Fri Jul 18, 2014 10:29 pm
Forum: Paint & Bodywork Tech
Topic: Vespa Rally colour
Replies: 3
Views: 950

Re: Vespa Rally colour

Cheers guys, thanks for your help
by Scootermonkey
Thu Jul 17, 2014 7:09 am
Forum: Paint & Bodywork Tech
Topic: Vespa Rally colour
Replies: 3
Views: 950

Vespa Rally colour

Hi guys, Im after the colour code for the orange colour that Vespa did their Rally 200's in about 1973 Anybody got any ideas? Thanks