Search found 364 matches

by eibargum
Mon Jul 23, 2018 1:20 pm
Forum: Vespa Tech
Topic: P200e running issues when engine hot!
Replies: 17
Views: 1392

Re: P200e running issues when engine hot!

Martin, did you have to buy flywheel holding tool and puller to change the seal, or did you find another way.
by eibargum
Mon Jul 23, 2018 10:52 am
Forum: Vespa Tech
Topic: Dellorto Si 24/24 help please.
Replies: 3
Views: 462

Dellorto Si 24/24 help please.

On other forums iam reading conflicting information, iam running lean at 1/4 throttle and iam changing idle jet to try and correct, some have told me I wont be on the main at 1/4 throttle so the idle jet is the way to go, others tell me that on this carb the main jet is used all through the rev rang...
by eibargum
Sun Sep 04, 2011 6:14 pm
Forum: Lambretta Tech
Topic: Killing spark plugs ...why ??
Replies: 20
Views: 2738

Re: Killing spark plugs ...why ??

Just as a guide, i use Nippon Denso 27 [which is a NGK 9] in my RB and would in any engine thats run hard, i even used a 31 for a while to see if it oil,d up at low speed, which it didnt. In my Mugello i use a Denso 24, same as a NGK 8.
by eibargum
Sun Sep 04, 2011 10:01 am
Forum: Lambretta Tech
Topic: Killing spark plugs ...why ??
Replies: 20
Views: 2738

Re: Killing spark plugs ...why ??

Ive had a couple NGKs fail for no good reason, i was told the chinese are making fakes, wether that is true or not i dont know, but after switching to Nippon Denso,s i,v had no problems.
by eibargum
Fri Aug 26, 2011 8:11 am
Forum: Lambretta Tech
Topic: Quality indian speedos series II
Replies: 3
Views: 717

Re: Quality indian speedos series II

I couldnt find a decent speedo for my series 2, i tried a few and all were crap, i end,d up altering a GP speedo [which work,d fine] and makeing it fit into a series 2 houseing, been running that for a couple of years now but even that went tits up going to the York do last weekend :cry: .
by eibargum
Sat Aug 13, 2011 8:34 am
Forum: Lambretta Tech
Topic: SIL 200 now won't rev over 3000rpm when warm
Replies: 21
Views: 3103

Re: SIL 200 now won't rev over 3000rpm when warm

wack 63 wrote:I've had this a couple of times and it has been the pick up.
Yep, that would be my guess, come across this a couple of times on mates scoots, borrow a working stator off somone to try.
by eibargum
Wed Aug 10, 2011 8:25 am
Forum: Lambretta Tech
Topic: all metal worm drive ( problem)
Replies: 10
Views: 1547

Re: all metal worm drive ( problem)

Is this on a ScootRS disc by any chance.
by eibargum
Wed Aug 03, 2011 7:56 am
Forum: Lambretta Tech
Topic: Better performance....?
Replies: 56
Views: 6129

Re: Better performance....?

If you didnt blend and polish the ports when you fitted it then do that for a start, then fit a larger carb, maybe 28mm delly, you could also take 2-3mm off the inlet side of the piston skirt, i also lifted and wide,nd the exhaust port slightly, it still only does 70mph [gps] but pulls well and is s...
by eibargum
Mon Jul 11, 2011 9:59 pm
Forum: Lambretta Tech
Topic: bgm rear shock question?
Replies: 4
Views: 729

Re: bgm rear shock question?

On mine thats at the bottom, but i presume its how they get the oil into the shocker.
by eibargum
Sun Jul 10, 2011 9:31 am
Forum: Lambretta Tech
Topic: Mikuni TMX30 or 35.....or 27. 240 advice and where to buy.
Replies: 9
Views: 2196

Re: Mikuni TMX30 or 35.....or 27. 240 advice and where to bu

I cant see the Atomiser on there Tony, but as far as the TMXs ive had you can only change the atomiser on the TMX30, not on the TMX35, its a bit swings and roundabouts mate, atomisers but few needle oppstions for the 30, needles but no atomisers for the 35 :? .