Search found 65 matches

by ScooterLoopyJohn
Sat Jul 23, 2011 7:32 am
Forum: Carburettor Set-ups
Topic: 238cc clasic rapido with dev tour and TM24 + FILTER
Replies: 2
Views: 1229

Re: 238cc clasic rapido with dev tour and TM24 + FILTER

Image
Image
Image
now fitted with a ram air long foam job
by ScooterLoopyJohn
Fri Jul 22, 2011 5:30 pm
Forum: Carburettor Set-ups
Topic: 238cc clasic rapido with dev tour and TM24 + FILTER
Replies: 2
Views: 1229

238cc clasic rapido with dev tour and TM24 + FILTER

71mm revtour piston(ts1 windows) classic rapido barrel, 60mm mec crank, Mikuni TM24 + ram air filter in toolbox, LTH German reed manifold. indian ign +vespa black box and coil.strobed at 2mm btdc.(18 degs) runs Li125 19x47 set up. Dev tour system 16.65 hp /13.6 ft lbs of torque with a wide spread. 5...
by ScooterLoopyJohn
Sat Feb 19, 2011 6:36 am
Forum: Show us yer Scoots!!
Topic: your pics of cutdowns..who's got what.
Replies: 64
Views: 15391

Re: your pics of cutdowns..who's got what.

Now under going a refresh

Image
by ScooterLoopyJohn
Sun Jan 02, 2011 7:44 pm
Forum: Lambretta Tech
Topic: AIR FILTER re 24TM & 238cc
Replies: 4
Views: 1612

Re: AIR FILTER re 24TM & 238cc

Interesting work John. What's the advantage of a plenium chamber like that? On a slightly related note your TM24 carb, would that be the same as the 24mm BGM carb? I only ask because I'm going to need a hose to fit on one at some point. Will the standard 22mm hose do the trick? Hose should fit i th...
by ScooterLoopyJohn
Sun Jan 02, 2011 7:11 pm
Forum: Lambretta Tech
Topic: AIR FILTER re 24TM & 238cc
Replies: 4
Views: 1612

AIR FILTER re 24TM & 238cc

I have been trying out many air filter set ups and this is my final air filter set up after loads of testing this works best and will be used on the XL with its 238cc reed rapido top end. Spanish air filter toolbox as a base. http://i8.photobucket.com/albums/a9/ScooterLoopyJohn/AIR%20FILTER/-0007.jp...
by ScooterLoopyJohn
Thu Dec 02, 2010 8:49 am
Forum: Liquid Cooled, Motorcycle Engine & Automatics Section
Topic: 125 GTS engine in a chopper
Replies: 3
Views: 1013

125 GTS engine in a chopper

While i can do all the fabrication and setting the wheel base etc ,for fitting the 125cc 4 stroke engine into the chopper. Just what electricals do i need , no indicators needed any one willing to do a simple wiring diagram i could follow and what else is needed (cdi rectifier battery for elec start...
by ScooterLoopyJohn
Tue Nov 23, 2010 9:24 am
Forum: Show us yer Scoots!!
Topic: Slade skelly
Replies: 10
Views: 2055

Slade skelly

This is my Slade tribute skelly, forgot i had these photo’s hope you like it. Engine is Rapido 230cc with reed manifold and 28mm PHBH Delly. Mirrors and spots to be added. http://i8.photobucket.com/albums/a9/ScooterLoopyJohn/SKELLY/FRONTSKELLY.jpg http://i8.photobucket.com/albums/a9/ScooterLoopyJo...
by ScooterLoopyJohn
Tue Nov 16, 2010 9:15 am
Forum: Lambretta Tech
Topic: Antidive upgrade scootRs brake.
Replies: 26
Views: 2427

Re: Antidive upgrade scootRs brake.

These can be used to improve the anti dive rod.



by ScooterLoopyJohn
Sun Oct 31, 2010 8:39 am
Forum: Lambretta Tech
Topic: SLJ / Jimmers Reed Valve Fitted !
Replies: 8
Views: 1556

Re: SLJ / Jimmers Reed Valve Fitted !

The manifold shown is our take on the 1980's taffspeed casting box Ian lent us. I used Yamaha RD reed blocks so should be easy to get any number of differant types for the reeds. If the opening is square they are RD250 reeds, larger oblong then RD350 and TSI size then YPVS . there where only 20 cast...
by ScooterLoopyJohn
Tue Oct 19, 2010 11:13 pm
Forum: Lambretta Tech
Topic: Did I change my gearbox for no good reason?
Replies: 10
Views: 1481

Re: Did I change my gearbox for no good reason?

fred wrote:personally i'd have just fitted 18/47 to the li125 box.
This is my box of choise on all my scooters. easy to play with the gear and chains