Search found 36 matches

by Spursy
Thu Jan 21, 2010 7:44 pm
Forum: Carburettor Set-ups
Topic: Idle jet emulsion tube ?
Replies: 2
Views: 640

Idle jet emulsion tube ?

Got a 30mm VHSH and read some were some people take these out of the carb so it improves the fuel flow ,my ? is does it ,,,,,any one tried this ? :roll:
by Spursy
Mon Nov 30, 2009 7:26 pm
Forum: Carburettor Set-ups
Topic: Delly VHSH SET UP
Replies: 3
Views: 1881

Re: Delly VHSH SET UP

Image
by Spursy
Wed Nov 11, 2009 7:02 pm
Forum: Carburettor Set-ups
Topic: Delly VHSH SET UP
Replies: 3
Views: 1881

Delly VHSH SET UP

Been try a vhsh 30mm carb on me scoot , could not find any links to any set up for a 175cc and noticed a few other peeps been having probs with set up info , so i thought these links i found may be of help ,,, even if some are for go carts carb setting up is the same principle :roll: http://www.con...
by Spursy
Fri Nov 06, 2009 11:59 am
Forum: Lambretta Tech
Topic: Carburettor - Float Needle Valve ,, what size
Replies: 3
Views: 577

Re: Carburettor - Float Needle Valve ,, what size

Hello agian ,, tried the 264 sean ,,,man it made the spluttering worse , mid throttle was like a machine gun ,,lol will try a 262 :roll:
by Spursy
Wed Nov 04, 2009 5:50 pm
Forum: Lambretta Tech
Topic: Carburettor - Float Needle Valve ,, what size
Replies: 3
Views: 577

Carburettor - Float Needle Valve ,, what size

Need a bit of help ,, built a 175 engine,lammy, 30 mm delly ,scootrs pipe, got ma jetting just about right , but wondered what Float Needle Valve size to use its got a 225 in it at mo , but when i get to between 1/2 and 3/4 throttle is splutters a bit , any ideas,,,?? jets are as follows 120 main x...