Search found 231 matches
- Sun Jun 25, 2017 8:00 pm
- Forum: Lambretta Tech
- Topic: bgm stator wont retard enough
- Replies: 11
- Views: 5386
Re: bgm stator wont retard enough
What i cant understand is that when i put the std flywheel back on , it seems to retard a lot further , ie 17deg
- Sun Jun 25, 2017 7:19 pm
- Forum: Lambretta Tech
- Topic: bgm stator wont retard enough
- Replies: 11
- Views: 5386
Re: bgm stator wont retard enough
Yes garry woodruff key is at 8 o'clock, and when the arrow on the flywheel is on the 19 degree mark , the two lines mark up with the pick up box on the stator
- Sun Jun 25, 2017 6:43 pm
- Forum: Lambretta Tech
- Topic: bgm stator wont retard enough
- Replies: 11
- Views: 5386
Re: bgm stator wont retard enough
Yes tdc and timing marks on , and strobed
- Sun Jun 25, 2017 6:14 pm
- Forum: Lambretta Tech
- Topic: bgm stator wont retard enough
- Replies: 11
- Views: 5386
bgm stator wont retard enough
Ive just fitted a lighter flywheel from af and im now struggling to retard my bgm stator to 17deg , the best i can get is 19 deg , i have filed the holes as far as i dare go , the std flywheel seems to retard a lot further , any suggestion? Thanks Steve
- Mon May 01, 2017 8:30 am
- Forum: Lambretta Tech
- Topic: Mb or Readspeed springs?
- Replies: 6
- Views: 3786
Mb or Readspeed springs?
Fitted a reedspeed 5 plate clutch in my gt200 , and thought it would be a good ide to fit some mb springs at the same time but find the clutch is heavy er than i would have liked , my question is before i open up the engine again , are the reedspeed ones any lighter ,, or am i wasting my time, regar...
- Fri Apr 21, 2017 1:23 pm
- Forum: Lambretta Tech
- Topic: gt200 ?
- Replies: 21
- Views: 9030
Re: gt200 ?
Ok Rich , can you or Eden supply me with what I need asap , or do you supply anyone so I can get them , Steve
- Fri Apr 21, 2017 7:44 am
- Forum: Lambretta Tech
- Topic: gt200 ?
- Replies: 21
- Views: 9030
Re: gt200 ?
2 1/2 turns out
- Thu Apr 20, 2017 10:43 pm
- Forum: Lambretta Tech
- Topic: gt200 ?
- Replies: 21
- Views: 9030
Re: gt200 ?
Ticks over ok , first or second kit 1 base gasket then packed then another base gasket , no head gasket all sealed with threebond, gt head , new carb, all running in has been done around town ECT, using a n3c plug , at time of nip up I was doing 50 behind a van and just eased of the throttle , steve
- Thu Apr 20, 2017 6:12 pm
- Forum: Lambretta Tech
- Topic: gt200 ?
- Replies: 21
- Views: 9030
Re: gt200 ?
Rich , the engine spec is as follows 60/110 gt crank , bgm box pipe , 30mm phbh with breathsweet ,x13 needle 2nd clip from top, av268, 55 pilot , 130 main engine has done about 150 miles so far with no problems just started to take it to about 50mph over the last few days and as i say it nipped up o...
- Thu Apr 20, 2017 6:00 pm
- Forum: Lambretta Tech
- Topic: gt200 ?
- Replies: 21
- Views: 9030
Re: gt200 ?
hi Eden the atomiser is an av268, Steve