Scooterotica

poshscooter

I am putting together a ts1 for a friend. It is a 225 with a Scorpion pipe and a TMX35 carb. i have fitted a rear exit fast flow fuel tap (camlam) and routed the fuel pipe near the engine bump stop. I have started it no problem, and if I rev it slowly it seems to rev cleanly. The problem is when i s...

poshscooter

I upgraded my non disc PX about 6 months ago with a SCOOTRS kit and have not looked back. The headset was easy to modify with hack saw, file and dremmel. The thing I had in my favour was this was carried out before respraying so i didn't have to worry about damaging the paintwork. But the results ar...

poshscooter

Thanks for your replys

Much appreciated

poshscooter

Has anybody come across this problem before. I've got a Li125 with a 175 kit on it, and when warm the kickstart shaft appears to be hitting the clutch top plate. When I take the side case off there are wear marks to the top plate and the kickstart shaft itself and yesterday when road testing the sco...

poshscooter

I see the seat work is of equally high standard,top quality mate!

poshscooter

As everybody else has said top quality artwork but a little bit sinister. I don't suppose Nooch you have some photos of your seat work.

Search found 6 matches

Fuel starvation

Re: Upgrading a non disc px

Re: kickstart shaft hitting clutch top plate

kickstart shaft hitting clutch top plate

Re: anima mundi 2009

Re: anima mundi 2009

Login • Register

Advertising