Scooterotica

skinhead63

hi peps im building a 210 with 60mm crank pwk 28 mm carb,reed induction with rd 350 reed valve would like to know what gearing to use other than T5 4th which is going in also using a jl3 r/h pipe.

skinhead63

hi have a 220 PX kit running a malossi reed and a 30 mil bhph 128 main needle set on middle notch, have tryed a few different settings but cant get rid.
pinking when gently throttling off and when flat out, any suggestions

skinhead63

Probably......if you tell us what cylinder kit you have, what exhaust, if it is reed-valve or not, and what jetting is in it currently, and if you are running an air filter or not........ dont have carb yet but will have at weekend,jl right hand,no reed block,will not have air fillter, its a beed s...

skinhead63

can any one help with with full carb jet set up on a 30 PHBH for my 225 please

skinhead63

i am building a vespa225 with a 28 bhph delorto do`s any one have any set up guides for this configuration also running a R/H JL PIPE

skinhead63

joeythescooterboy wrote:The "IT" mark is supposed to be 18 degrees but it's best to use a degree disc as the marks are intended as a guide only. The "A" mark is 23 degrees for a standard P2.

thanks for that will use a disc

skinhead63

hi i am building on a vespa 225 can any one tell me which of the 2 marks on the casings is closest to 19 degrees thanks

skinhead63

can any one suggest which 12v converstion is the best to use on a LI 150 please

skinhead63

hi been trying with out success to sort my mates p2 out. it`s standard but i can`t get it to pull throu the top end rev`s and now the clutch is making a noise.

Search found 9 matches

gearing

pinking

Re: vespa 225

vespa 225

Re: Vespa Carb Set-ups.....

Re: p2 timing

p2 timing

12 volt kit

poor running

Login • Register

Advertising