Here’s photos of the amount of play before the kick engages, and the current adjustment of the ramp.
https://drive.google.com/file/d/1Xrmbla ... p=drivesdk
https://drive.google.com/file/d/15Xi3kd ... p=drivesdk
Search found 35 matches
- Mon Apr 01, 2024 12:45 am
- Forum: Lambretta Tech
- Topic: Lambretta Li150 S3 kickstart issue
- Replies: 1
- Views: 206
- Mon Apr 01, 2024 12:41 am
- Forum: Lambretta Tech
- Topic: Lambretta Li150 S3 kickstart issue
- Replies: 1
- Views: 206
Lambretta Li150 S3 kickstart issue
Hi All. My 65’ Li150 doesn’t always start with the kick when cold. It always starts with a bump start down a hill, and I can always kick start it when it’s already warm. Someone suggested I check the play on the kick before it engages. Sure enough it has quite a bit of play before it engages. So I p...
- Tue Jun 06, 2023 4:03 pm
- Forum: Lambretta Tech
- Topic: Lambretta Starting Trouble - No Fuel to Combustion Chamber
- Replies: 4
- Views: 6351
- Mon Jun 05, 2023 7:30 pm
- Forum: Lambretta Tech
- Topic: Lambretta Starting Trouble - No Fuel to Combustion Chamber
- Replies: 4
- Views: 6351
Lambretta Starting Trouble - No Fuel to Combustion Chamber
Hey all, Got a 1965 Li150 that I installed a PHBL carb on. I've put like 3k miles on this thing and it runs fantastic. The problem I am having is, occasionally the kick starter doesn't seem to draw fuel into the combustion chamber. I kick and kick and kick and nothing. It's almost like a vacuum seal...
- Tue Jan 18, 2022 6:46 pm
- Forum: Lambretta Tech
- Topic: Li150 - PHBL Carb Tuning - Ruling Out Air Leaks, etc.
- Replies: 2
- Views: 1934
Li150 - PHBL Carb Tuning - Ruling Out Air Leaks, etc.
Hello, Ive got a 65' Li150 with an SIL ignition. I had to replace the indian jetex carb with a PHBL 24mm which involved dropping the eninge, replacing the intake, and also removing and refitting the exhaust with a new gasket, because I also had to replace the cooling shroud with one that would allow...
- Wed Dec 29, 2021 6:00 pm
- Forum: Lambretta Tech
- Topic: Li150 - new carb - won't start
- Replies: 4
- Views: 3380
Re: Li150 - new carb - won't start
Hey All, Thanks for your input so far. I do have some progress to report. My initial non-running issue with the new carb was traced to bad gas, I knew it had to be something simple and sure enough the gas that had been sitting for months came out all white and cloudy as if it had moisture in it. I p...
- Mon Dec 20, 2021 10:50 pm
- Forum: Lambretta Tech
- Topic: Li150 - new carb - won't start
- Replies: 4
- Views: 3380
Li150 - new carb - won't start
Hello, I have a 65' Li150 that was bored out to 175cc by previous owner. It also has a SIL electronic ignition/stator installed. When I got the bike it had an indian Jetex carb. It ran very well for about 4-5 months but then started having hard starting problems that appeared related to carb floodin...
- Mon Oct 18, 2021 4:06 pm
- Forum: Scooterotica Tuning & Maintenance Information
- Topic: Li150 starting troubles - fuel related?
- Replies: 6
- Views: 11754
Re: Li150 starting troubles - fuel related?
Choke operating correctly? What size pilot jet? If you think the float bowl is overfilling. You may need a replacement needle valve (Red-tip) Check to see if it shuts off by holding the float up with the fuel turned on. Choke operating correctly? What size pilot jet? If you think the float bowl is ...
- Mon Oct 18, 2021 1:18 am
- Forum: Scooterotica Tuning & Maintenance Information
- Topic: Li150 starting troubles - fuel related?
- Replies: 6
- Views: 11754
Li150 starting troubles - fuel related?
Hello, I’ve got a 65’ Li150 S3 with a Jetex sh2/22. Runs fantastic, super strong spark, etc. problem is sometimes it’s really hard to start, and the only thing you can do is push it down a hill and pop the clutch. There is fuel in the bowl when this happens but it seems (to me) like a lot of fuel. ...
- Fri Jul 30, 2021 5:18 pm
- Forum: Lambretta Tech
- Topic: Jetex SH2/22 Float Sticking?
- Replies: 9
- Views: 14454
Re: Jetex SH2/22 Float Sticking?
Hey all, I thought I had my problem solved, but this morning I had the same issue again. What's weird is it ran great for like 6 days, but just started having problems again this morning. Same as always, would not start, but I was able to bump start it down a hill. Super frustrating. To recap: I hav...