Thanks mate, pretty much my conclusion to be honest.
It’s run in, so maybe time to give it some b@11@x & see what happens (careful b@11@x that is)!
Search found 16 matches
- Thu Apr 22, 2021 7:29 am
- Forum: Vespa Tech
- Topic: CHT (Vespa BGM 177)
- Replies: 4
- Views: 3299
- Wed Apr 21, 2021 8:03 pm
- Forum: Vespa Tech
- Topic: CHT (Vespa BGM 177)
- Replies: 4
- Views: 3299
Re: CHT (Vespa BGM 177)
Thanks for the reply! Yes the fuel chamber has been drilled to 2.5mm & a Sip fast flow tap (v2) fitted, I’ve even gone as far as checking the fuel bowl top was correctly fitted & found I had to remove/file approx 2mm off the alloy to ensure that the top & rubber seal seated correctly, th...
- Sun Apr 18, 2021 6:55 pm
- Forum: Vespa Tech
- Topic: CHT (Vespa BGM 177)
- Replies: 4
- Views: 3299
CHT (Vespa BGM 177)
Been perusing various forums to try & find out what’s a suitable ‘SAFE’ Cylinder Head Temperature but as usual the information put out is so varied & at times so vague I’m perplexed! 🤔 Scoot is; Bgm 177 57mm Pinasco Racing crank Drt Si 24/24 (55/160, Be3, AC 160, mj 125, both holes drilled o...
- Sun Mar 14, 2021 7:25 pm
- Forum: Vespa Tech
- Topic: SMART CARBS
- Replies: 5
- Views: 3494
Re: SMART CARBS
Thanks Shaunbond & 108 I’ve had a good peruse of the links you’ve kindly sent me & other than being a sucker for new ideas or wheel reinventing technology I’m likely in all probability to go down the traditional side draft carb route! However I’m still of the opinion that SmartCarbs really d...
- Sat Mar 13, 2021 8:03 pm
- Forum: Vespa Tech
- Topic: SMART CARBS
- Replies: 5
- Views: 3494
Re: SMART CARBS
Nice one mate, thanks for taking the time! Pretty much underscored what I was feeling/thinking about SmartCarbs, especially as I’ve trawled through the Astro-web since October & have found very scant information, positive or negative & next to nothing other than from SIP Gotta agree with you...
- Wed Oct 28, 2020 8:36 pm
- Forum: Vespa Tech
- Topic: PX 125 Bogging down problem
- Replies: 17
- Views: 9693
Re: PX 125 Bogging down problem
My first thought was maybe a dicky float/needle + take the idle jet & main jet stack out, give them & the passageways a good clean with carb cleaner!
Good Luck Parky!
Good Luck Parky!
- Tue Oct 27, 2020 7:25 pm
- Forum: Sports Bar
- Topic: The Song Title Thread - Pointless but Addictive!
- Replies: 25751
- Views: 4626502
Re: The Song Title Thread - Pointless but Addictive!
How Soon is Now-The Smiths
- Mon Oct 26, 2020 8:07 pm
- Forum: Sports Bar
- Topic: The Song Title Thread - Pointless but Addictive!
- Replies: 25751
- Views: 4626502
Re: The Song Title Thread - Pointless but Addictive!
The Can-Can - Buster Bloodvessel & His Amazing Bad Manners
- Mon Oct 26, 2020 8:03 pm
- Forum: Vespa Tech
- Topic: Malossi 172 top end
- Replies: 6
- Views: 3331
Re: Malossi 172 top end
Hello Paul, 1st thing I did was fit the SIP mk2 fast flow tap mate, no problems with fuel starvation issues, the Si 26 is just a plain t@#t to dial in, never had any trouble with an Si 24 + drilled filter & passageways though! With the Si 26 + Venturi the recommendation is to up jet by 10 points...
- Sat Oct 24, 2020 7:07 pm
- Forum: Sports Bar
- Topic: The Song Title Thread - Pointless but Addictive!
- Replies: 25751
- Views: 4626502
Re: The Song Title Thread - Pointless but Addictive!
To have & to have not by Billy Bragg.