Scooterotica

gaz_powell

Martin Leech makes chokes correct size fit phbh.

Perfect fit.

For left or right hand carb in black or grey

I found the Chisel adjustable to bulky

gaz_powell

The T5 flywheel side bearing does sit proud by about a mil.

This is why so many T5 casings have had the bearing go through the casing at assembly.

Sound like crank out of true, also check the drive bearing

gaz_powell

https://www.scooterhelp.com/tips/engine ... vespa.html

This may help

gaz_powell

Sorry for late response, yep new switch and a bit if new wiring. All working perfect

gaz_powell

I've got them from here, no problems

https://www.ebay.co.uk/itm/203245234811

gaz_powell

Glad you sorted... If you want a true rally look with spaco, BGM now make an air screw that is the same as the old dellys

gaz_powell

SI or PHBH type. All SI carbs sre made by Spaco now, regardless if the are labelled Pinasco, BGM etc. Ive use the 24E, 26E and 24G, with no problems at all on tuned and untuned P2 and T5. Carb settings are the same, jets interchangeable with dellorto. One thing i do is cut the air screw down and slo...

gaz_powell

I had this and it turned out to be stator, it had what appeared a good spark outside the bike, all readings were good. Put a clean plug in and it would sometimes fire, once running revving clean on the stand... Turn it off and wouldnt start. I pulled a stator from a runner and bingo. Put new pick up...

gaz_powell

Most likely the latter, bad remanufactured part.

gaz_powell

https://www.ebay.co.uk/itm/185306831886 ... SwpWNiE4c6

Search found 1197 matches

Re: Choke cable

Re: T5 Flywheel Bearing Catching on Crank

Re: pk80 gearbox assemby

Re: Weekend work

Re: Cork chain case gasket

Re: Spaco

Re: Spaco

Re: Hard to start

Re: TV175 2nd series light switch housing

Re: under kick start fresco

Login • Register

Advertising